Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › E Dialogs › Dialog Block manager

Dialog Block manager

The window opens with the command Block manager, by double-clicking a block instance or from the right-click menu. It floats over the drawing without a grey veil, the drawing stays operable; it can be moved by its title, the position is saved. Context: Blocks.

An open window follows the drawing: after Open…, New drawing, undo, delete or 🧩 Create block from selection it rebuilds itself; after opening another drawing no block is selected any more.

«Block manager»: (1) search field, (2) «Parts-list data», (3) Insert, (4) Show, (5) Edit, (6) BOM data, (7) Replace with, (8) Rename, (9) Export, (10) Delete
Block manager: (1) search field, (2) Parts-list data, (3) Insert, (4) Show, (5) Edit, (6) BOM data, (7) Replace with, (8) Rename, (9) Export, (10) Delete

Header

Search …

Filters the tree by name; subtrees with hits are unfolded. Search term and check box survive closing and are applied again when opened next. Without hits: No blocks matching „…“ found in this drawing with the note about Show all.

Parts-list data

With the check box the field also searches article number, material, standard, supplier, weight, price, unit and remark of the BOM data.

Show all · n definitions

Show all clears the search field. On the right stands the number of all definitions of the drawing, at the far right ✕ to close.

Tree

Each row is a definition: fold triangle (with contained sub-blocks), eye (hides and shows all instances of this definition — 🚫 when hidden), name with multiplicity ×n within the assembly, marks and on the right n× in the drawing — the number of insertions in the model and on all sheets together. A click selects the block (blue bar on the left) and highlights its instances in the drawing; instances selected in the drawing colour their row light blue.

MarkMeaning
1 partassembly counts as one part in the parts list (default)
dissolvedassembly is broken down into its sub-blocks
Parts listexcluded from the parts list — an inserted parts list table, live or as a fixed table from an older drawing
↻cycle in the nesting

Unused blocks · Clean up

Definitions without an instance and without occurrence in other blocks are listed in a separate section. Clean up deletes them all at once after confirmation (Delete unused blocks?); status line n unused blocks deleted. The whole clean-up is a single undo step. Counting covers the model and all sheets: a block that is inserted only on a sheet counts as used.

Actions

All actions act on the selected block; without selection the window reports Please select a block in the list first.

⤵ Insert

Attaches a new instance to the mouse (Inserting instances). The window stays open — so you place several blocks one after the other.

🔍 Show

Selects all instances of the block in the drawing, zooms to them and lets them flash briefly (n instances selected). If the block has no instance in the drawing: No instances placed (block is only contained in other blocks). If the insertions are only in another space, it reports n× in another space — choose again there (tab “Model” or a sheet).

✏️ Edit

Closes the window and opens the block editor. A live parts list cannot be edited this way; the status bar reports in red Live parts list — it is generated from the drawing and cannot be edited in the block editor; cells via «Edit parts list…» (double-click), for a fixed version use «Explode» — see Parts list.

📋 BOM data

Opens the dialog BOM data; the window stays open. For a live parts list it reports in red Live parts list — it is built from the drawing and has no BOM data of its own.

🔁 Replace with …

Replaces all instances of the block by another one (Replacing in the Block manager); if the block occurs inside other blocks, the question follows whether there as well. Replaced are the insertions in the space that is currently open (model or sheet). In the block editor the program refuses a target that contains the block being edited (for example … contains «…» — a block cannot contain itself).

Rename

Asks New name. A name already taken is rejected (Name already taken). The block name can also be changed in the dialog BOM data.

💾 Export

Writes Name.ldblk with all sub-blocks into the download folder (Block files).

🗑 Delete

Deletes the definition after confirmation (Delete block definition «… permanently?»). Refused while the block is in use — the reason stands in red in the window: The block is still placed n× in the drawing. Delete or explode all instances first. or The block is contained in «…. Remove it there first.» The button is then greyed out and states the reason as tooltip.

Insertions in the model and on all sheets are counted. On a sheet, undo does not take the deletion back there but in the model; the status bar therefore adds To restore: tab “Model”, then Ctrl+Z (this also applies to Clean up).

While the block editor is open, Delete and Clean up are locked: Block definitions cannot be deleted in the block editor — first click «Speichern» (save) or «Abbrechen» (cancel).

Dialog Replace with …

«Replace ‹name› with …»: search field, tree of the definitions, «Cancel»
Replace “‹name›” with …: search field, tree of the definitions, Cancel

The same tree with search field, without actions: a click on a row replaces immediately. The source block is greyed out and cannot be chosen. If there is no other definition, the dialog does not open (No other block available as target). Esc or Cancel close without change.

Related topics