Creating a sheet
Goal
An A3 landscape sheet named “Overview”, with a frame and a title block — ready to print.
Steps
- Click the “+” tab (3) in the status bar. The sheet “Layout 1” appears in A4 landscape, carries one viewport and opens right away.
- Right-click the new tab (2). In the “Page setup” dialog choose format A3 and orientation Landscape (1), leave the margin at 10 mm (2), then “OK”.
- Double-click the tab, enter “Overview” as the name and confirm.
- Right-click an empty spot on the sheet → “🗒 Insert frame + title block” (2).



Result
The sheet carries the frame and title block (“Frame and title block inserted — n elements (freely editable)”); the sheet name appears in the “Title” field. Next, set up the viewports.

Tip
Set the format first and insert the frame and title block afterwards — both follow the sheet size and do not move along when the format is changed later.
Note
Every sheet has its own undo history and its own groups, welds and constraints. While the block editor is open, tabs, +, Page setup and Frame + title block are locked.