Messages about printing and exporting
Messages appear in the status bar at the bottom or as a browser prompt.
Print area
Position the print area — click = fix, Ctrl+wheel = scale, wheel = zoom
Status bar when the print dialog opens in model space.
Print area fixed — click the canvas = reposition, 🖨 = print
Status bar after the click on the drawing area.
Move the print area — click = fix
Status bar when a fixed area has been released again.
Printing layout: the sheet is output 1:1
Status bar when the dialog opens on a sheet; there is nothing to place.
Portrait / Landscape
Status bar after the keys H and Q in print mode.
Ready
Status bar after “Close” — print mode has ended.
Print preview
Print preview opened
Status bar once the print window has been created (Print window).
Popup blocked — please allow popups
Status bar when the browser suppressed the window. Remedy: allow popups for the program’s address and print again.
Printing failed (reason)
Red (since v3.0.99): printing failed — in the model, on a sheet or with Ctrl+P. The dimension settings stay as they were, the Print window stays open, and the cause is in the browser console. A possible trigger is a custom dimension type with unusable values. Remedy: read the reason; check the affected dimension or dimension type.
Print profiles
Profile name (e.g. “Workshop”, “Draft”, “Plotter A0”):
Prompt after 💾. An existing name updates that profile.
No profile name given
Status bar when the entry was empty.
Print profile "name" saved / Print profile "name" updated
Status bar after 💾.
Print profile "name" activated
Status bar after choosing an entry in the profile list; all line widths, print colors and collective values are set.
Print profile "name" activated — no profile values for layers: names
Addition when the drawing contains layers the profile does not know. Those layers keep their previous values. Remedy: enter the values and save the profile under the same name again.
From drawing — the original attributes (line width & color) from the file are printed
Status bar after choosing “From drawing”; the layer rows are disabled then.
No profile chosen / Profile not found
Status bar when deleting without a selection, or for a profile that no longer exists.
Delete print profile "name"?
Prompt after 🗑.
Print profile deleted
Status bar after the confirmation.
Calibration
Print calibration reset
Status bar after “Reset”; the factor is 1.0000 again.
Export
n elements selected. OK = export the selection only / Cancel = export all elements
Prompt when exporting with a selection (Export prompts). Since 4.0.5 it also appears when only dimensions or hatches are selected; dimensions and hatches of a selected block come along.
Export paper space — OK = sheet, flattened (scale applied) / Cancel = model content
Prompt when exporting on a sheet.
Export in paper space: the model content is exported
Status bar after “Cancel” on the prompt above.
No elements to export
Status bar when nothing visible is present. Remedy: show hidden layers or Z levels again.
DXF exported: n elements → file · SVG exported: n elements → file
Status line after exporting from the model. Since 4.0.5 Export SVG in the model draws like printing — with blocks, dimensions, hatches, balloons, notes, leaders, tolerance frames, datums, points and images, 1:1 in mm; invisible things are left out. Without anything visible no file is created.
DXF exported: sheet Name — … · SVG exported: sheet name — n elements → file
Status bar after exporting a sheet.
DXF export failed (reason) · SVG export failed (reason)
Red (since v3.0.101): the file could not be created — in the model, from the selection, for a sheet (flattened or model content). No file is created; the cause is in the console. Possible triggers: a damaged DXF profile or a dimension that cannot be drawn. The same pattern applies to CSV export failed (…) of the parts list. Remedy: read the reason; check the DXF profile or dimension type.
Groups in the printout
Group is printed — click: exclude from printing / Group is NOT printed — click: print again
Tooltip on the 🖨 of a group row (Eye, lock and printing).
Exclude group from printing / Print group again
Entries in the right-click menu of the group list.