Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › B How-to › How do I save my own standard part?

How do I save my own standard part?

  1. Draw the part so that the desired insertion point lies at the origin (0, 0) — easiest is to draw it there or to move the finished part with snap onto the origin.
  2. Put the elements on suitable layers (contour, centre line, hidden); the layers are saved along.
  3. Select all elements of the part.
  4. Right-click → 🧩 Save as standard part, enter the name (e.g. ISO 4762 M6x20 (Ansicht)), Enter. The browser downloads Name.json. If the file cannot be created, the status bar reports in red Standard part not saved (reason), and no file is created.
  5. Place the file on the server in normteile/<category>/ and press ⟳ in the panel.
The input field «Standard part name»
The input field Standard part name

Add BOM data

The command writes no BOM fields. Add a field bom with name, artnr, norm, material, einheit in the file — it is taken over when inserting as block. Further keys in bom are custom fields: when inserting they are added to the BOM fields of the drawing. Or maintain the data on the block after inserting.

Change an existing standard part

✎ in the panel (or on a tile) opens the file as a drawing without a file link, under the name of the standard part — so Ctrl + S asks for a name and never overwrites the drawing that was open before. Change, select all elements, Save as standard part again with the same name — and replace the file on the server.

Related topics