Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › F Messages › Messages for file and tools

Messages for file and tools

The commands report in the status bar at the bottom: what is expected next, what has happened and, in case of an error, why nothing happened. The texts appear here as the program shows them; placeholders such as n or name stand for the respective value.

Import and export

DXF imported: n entities from name / n blocks taken over from the DXF file

The DXF import has run. If there were findings, the number of possible issues is appended and the check dialog opens.

No entities found in the DXF

The file could be read but held no geometry. Remedy: write the file again from the originating program, if need be as an older DXF format.

“Name” not inserted — drawing unchanged (reason)

Red: an insertion failed — importing or dropping DXF or SVG, Import drawing…, Load block, a standard part, Ctrl+V or a hand-over from an add-on. Since v3.0.96 the drawing stays exactly as it was (content, layers, blocks, sheets, undo history, selection); placing at the mouse ends, a hand-over is not acknowledged. Up to v3.0.95 the message was DXF import error: … or SVG import error: …, and a half insertion remained. Remedy: check the file; an SVG or image file comes in via Import SVG or Insert image.

⚠ n damaged entries cleaned up · … / ⚠ 1 damaged entry cleaned up · …

Red prefix before the message of opening or inserting (since v3.0.98). Every file, every package, the LiberoDraft data inside a DXF and the settings are checked before use: an unreadable value falls back to the default (the colour of an element to that of its layer), an unreadable point is dropped, an element without readable geometry is dropped, a number given as text becomes a number. Settings from browser storage and from Import settings… are cleaned up silently. Remedy: check the result; have the file corrected at its source.

SVG imported: n elements from name · No elements found in the SVG

The same for the SVG import. If the file holds only images or text without paths, nothing arrives. If reading fails, “Name” not inserted — drawing unchanged (reason) appears.

The file contains no importable geometry

A file dropped with the mouse brought nothing usable.

Only .cad2d, .dxf, .svg or image files

A file type LiberoDraft does not read was dragged onto the drawing area.

No elements to export

There was nothing visible for the DXF or SVG export. Remedy: switch hidden layers on or clear the selection.

Export in paper space: the model content is exported

On a sheet the prompt was answered with “model content” (export prompts).

Image

Image inserted: name (w×h px)

The image sits in the middle of the section at half the window size and 50 % opacity.

Image from clipboard (w×h px) — click places it, ESC cancels

An image was pasted with Ctrl + V and hangs on the pointer.

Image scaled: ×f (a → b) / Image scaled: w x h mm / Scale image — drag, Shift = free distort / Scale: click the base point...

The calibration has been carried out; the image now has the scale you wanted.

Image not scaled — factor ×f would not give a valid size

Since v3.0.105: the calibration or scaling would give an invalid image size (zero, infinite or too large). Nothing changes. Remedy: enter another factor or other dimensions.

Width/height must not be 0 — check the values / Both values must be > 0

A 0 stood in width or height in the dialog “Image properties”.

Image deleted · Image placed · Image Z level: n · Image insertion cancelled

Feedback on the remaining actions on the image.

Coordinate table

Coordinate table: a click places the table (top-left corner) · ESC/right-click cancels

The table has been created and hangs on the pointer.

Coordinate table placed (n elements) — new group "name"

The table is in place; its lines and texts form a new group.

Coordinate table cancelled

Placing was ended with Esc or a right-click.

No points present

The drawing holds no point elements that could be listed. Remedy: place points first (point, distribute points).

Number of points

Label of the floating input field of distribute points. Allowed range is 1 to 1000.

The drawing holds no points. Remedy: place points with Point or create them with Distribute points.

Axis cross

Axis cross: choose target circles — click or rubber band, buttons All / Only without cross / None, Enter creates

The target selection is running (selection bar).

Please keep at least one circle or arc selected

“Next…” was pressed without a selection.

Axis cross inserted: n circle(s)/arc(s), m element(s)

The crosses have been created; m counts lines and, where chosen, centre points.

Axis cross cancelled · No circles present · No circles or arcs in the drawing — please draw some first

The command was ended or found no suitable elements.

Text, leader, remark

Text changed

An existing text was changed through the dialog.

The address entered had another scheme; the text remains, the link was dropped.

Arrow tip set — click the 2nd point (text end) / Leader text: / Leader text (empty = no text):

The first click of the leader is in place. The questions Leader text: (when editing the text of an existing leader) and Leader text (empty = no text): ask for the text.

Leader placed · Leader changed · Move attachment — snaps to the nearest frame side · Leader attachment moved

The arrow has been placed, or its text was changed by double-clicking.

Remark: set the arrow tip (ESC ends) · Remark: click the box position · Remark placed — click the next arrow tip (ESC ends)

The three steps of the remark; the tool stays active after placing.

Note: drag to resize — the text rewraps

A handle square at a corner of the remark has been grabbed. While you drag, the text rewraps at word boundaries (box size).

Note: 34.0 x 22.0 mm · Note: 34.0 x 22.0 mm — text is cut off, shown by the triangle at the bottom right

On releasing the corner handle: the box size reached, in millimetres. The second version appears when not all lines fit at a fixed height; the triangle at the bottom right of the box keeps showing it afterwards. Remedy, if nothing should be missing: drag the box higher or choose Automatic size in the dialog.

Cancelled

Esc ended a remark, balloon, datum, feature control frame or “Distribute points”.

Open with preview

Messages of the Open with preview dialog; they appear in the status line of the dialog, not in that of the program.

Choose a folder or files — drawings (.cad2d), standard parts (.json) and blocks (.ldblk) appear with a preview image. The folder has to be chosen again in every session (browsers do not remember folders); the images stay cached in the browser.

The initial state after the dialog has been opened. No action needed — press Choose folder… or Choose files….

No matching files (.cad2d, .json, .ldblk) found

The chosen selection holds none of the three file types. Remedy: choose another folder; the dialog does not look into foreign formats.

3 files, 2 images rendered… · 3 files · 1 from the cache · 2 newly rendered

While and after the preview images are computed. The second version says how many images came from the browser cache and how many were created anew.

1 file(s) were changed or removed since the selection — please choose the folder again

Cause: The browser only releases the files that existed when you chose them. If one has been changed, deleted or added since, the program can no longer reach it.

Remedy: press Choose folder… again. Re-read does not help here.

No file matches the search

In the tile area, when search term and folder choice leave nothing. Esc or the ✕ in the search field clears it.

not readable

Cause: The file could not be interpreted as a drawing, standard part or block — it is damaged or comes from a foreign application. The tile shows ⚠ not readable; on a click the text appears in the status line.

Remedy: try the file with the ordinary Open; if that fails too, it is unusable for LiberoDraft.

Distribute points

Distribute points: click an element (ESC ends)

The Distribute points tool is waiting for an element.

Distribute points: please click an element (line, circle, arc, polyline, …)

The click missed every suitable element.

n points placed — click the next element (ESC ends)

The points have been created; the tool stays active.

Invalid count (1–1000)

The prompt “Number of points” held no number between 1 and 1000.

Element not supported

Points cannot be distributed on this element type.

Add-on tools

Add-on tools: manifest not found or invalid

Status bar when opening the add-on tools menu and on a click on Import DWG…, Export DWG… or Import STEP… (file menu, command search) if the list had not been loaded yet: the file zusatzprogramme.json next to the program is missing or is not valid JSON. Remedy: check the file on the server.

Add-on “LiberoDWG” not found in the list · Add-on “STEP2LiberoDraft” not found in the list

Red, after a click on Import DWG…, Export DWG… (LiberoDWG) or Import STEP… (STEP2LiberoDraft) in the file menu or in the command search: the list of add-ons does not contain the program. No tab opens; the entries stay visible in the menu. Remedy: ask the operator to add the program to the list of add-ons (DWG and STEP via add-ons).

“Name” opened — load the DWG file there and send it to LiberoDraft · “Name” opened — save the drawing first, load it there and export it as DWG · “Name” opened — load the STEP file there

Status bar after an entry of the file menu (or of the command search) has opened the add-on in a new tab; Name is the name of the program in the list. The first version belongs to Import DWG… (LiberoDWG: load the DWG file there and send it to LiberoDraft), the second to Export DWG… (the same program: save the drawing first, load it there and export it as DWG), the third to Import STEP… (STEP2LiberoDraft: load the STEP file there). No remedy needed; the work continues in the new tab. If the browser blocks the new window, allow pop-ups for this page.

“Name” received from program — click to place

Status bar when an add-on tool (gear generator, fastener generator, sheet-metal unfolding) hands its geometry back. It then hangs on the mouse like a standard part.

“Name” received from Program — attaches to the cursor once the info window is closed

Since v3.0.71: the hand-over arrived while the info window is open (e.g. at the first start). The part waits; after Close or Esc it attaches to the mouse. With several hand-overs, the last one applies.

Add-on tools: invalid handoff

The handoff was incomplete or unreadable. Remedy: repeat the step in the add-on tool. Such a hand-over is not acknowledged, and the drawing stays unchanged.

🔒 Standard parts and add-ons only available with registration.

At the top of the menu Add-ons and in the window 🔒 Not unlocked after a click on a standard part, on ✎ on a tile, on an add-on or on Import DWG…, Export DWG… or Import STEP… in the file menu: the operator requires registration, and no start link is valid for more than 20 more days. Remedy: Register and open the start link from the mail, or obtain a longer-valid key with a donation (Registration).

Check and clean up

Cleanup works on the model — switched to model space

The check was started from a sheet; LiberoDraft switched to model space first.

Cleaned up: 1 element removed · Cleaned up: n elements removed · Cleaned up: n elements converted/exploded, m removed

The cleanup has been carried out and can be undone with Ctrl + Z.

Nothing to clean up

The chosen finding holds no entries any more.

This finding draws nothing in the drawing — there is no place to show

Status bar after “Show” for a finding without a place in the drawing — such as empty groups or unused block definitions. Cleaning up still works.

“Clean up” was pressed without a tick.

message · n possible findings — a cleanup is offered (any time via Ctrl+F → “Check & clean up drawing”)

Findings were discovered after an import; the check dialog opens.

message · no findings (check any time via Ctrl+F → “Check & clean up drawing”)

The import went through cleanly.

Related topics