Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › D Command reference › Edit local standard part

Edit local standard part

Purpose

Opens a standard part file as a drawing: the part lies in original coordinates, a point marks the insertion point, all tools are available. After changing, you save it again with Save standard part from selection. Context: Editing local standard parts.

Access

  • Panel Standard parts: button ✎ Open a local standard part for editing (3 in the picture at Standard parts); the tiles of the library have the same ✎ at the top right for parts from the server.
  • Command search : type Edit local standard part.

Procedure

  1. Click the button, choose the file. In the block editor the command is locked (A standard part cannot be opened for editing in the block editor — first click «Speichern» (save) or «Abbrechen» (cancel).). If the drawing is not empty, the browser asks: Open standard part "Name" for editing? The current drawing will be replaced (Ctrl+Z restores it).
  2. After OK everything running ends as with Esc; the part lies on the canvas, fitted, and the drawing switches to model space. It is now a drawing without a file: it carries the name of the standard part and is not linked to any file — Ctrl + S asks for a name instead of overwriting the previous file. Status line: Standard part "Name" opened for editing — modify, select and use "Save as standard part" again.
  3. Change, select all elements, right-click → Save as standard part, enter the same name. The browser downloads the new file; it replaces the old one only once you put it on the server in its place.

Rules

  • The replaced drawing is in the undo history: opening is one step, a single Ctrl+Z brings the previous drawing back.
  • If the file cannot be read, the previous drawing stays unchanged; the status bar reports in red “File” cannot be opened — drawing unchanged (reason). Unreadable values in an otherwise readable file are cleaned up; then ⚠ n damaged entries cleaned up stands in front.
  • The helper point at the insertion point lies on the active layer; do not include it before saving — or it becomes part of the standard part.
  • Dimensions, hatches, constraints, welds and groups of the file come along (as a group).

Related commands

Related topics