Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › D Command reference › Save As

Save As

Purpose

Saves the drawing under a new name or at another location. Afterwards the new file counts as the open file for Save.

Access

  • Key: Ctrl + Shift + S — always opens the file chooser, also for a drawing that is already linked to a file and also while the focus is in the floating input field (length, angle, dX/dY …).
  • File menu → 💾 Save As… (5).
  • Status bar: click on the file name at the left.
  • Command search : Save as.
File menu: (5) Save As…
File menu: (5) Save As…

Procedure

  1. Chrome, Edge: the system's save dialog opens with the name proposal; after Save the status bar reports Saved: Name.cad2d and the name appears in the status bar and in the browser tab.
  2. Firefox, Safari: the file is downloaded (browser download folder or prompt, depending on the browser setting); message Downloaded: Name.cad2d.

The name proposal is built from the drawing info: drawing no. and title joined by _, plus Rev and the revision — for example Z-2026-017_Lagerplatte_RevB. Illegal characters are removed, spaces replaced by _. Without entries the proposal is Unbenannt or, for the download, zeichnung (the status bar shows an unnamed drawing as Untitled).

When saving fails

  • If the drawing cannot be put together, the status bar reports in red Drawing not saved (reason); no file chooser appears, no file is created, and the change mark ● stays.
  • If writing to the file you have just chosen fails (e.g. it is read-only), the drawing is downloaded and reported in red: Saving to ‹file› failed (reason) — downloaded: ‹name›. The chosen file is not linked to the drawing. A half-written version is discarded.
  • If the download fails as well, the status bar reports it in red; ● and the name stay.
  • If you cancel the file chooser, nothing happens — without a message.
  • While the block editor is open, saving is locked: The drawing cannot be saved while the block editor is open — first click «Speichern» (save) or «Abbrechen» (cancel) in the editor bar.

Options

None. The file is always written as .cad2d; DXF and SVG have their own export commands in the file menu.

Related commands

Related topics