Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › D Command reference › Select all

Select all

Purpose

Selects the whole visible drawing: elements, dimensions and hatches.

Access

  • Key: Ctrl + A (outside an input field; in an input field the key selects the field content — also in the floating input field of a tool).
  • Command search : Select all.

Procedure

One call is enough. Only what could also be selected by hand is taken — the same gates apply to all three object kinds as for a single click and for the rubber band:

  • Elements: visible, on a visible layer, locked neither through the layer nor through a group.
  • Dimensions: the system switch Dimensions is on, the dimension itself is not hidden, its layer is visible and neither layer nor group is locked.
  • Hatches: as for dimensions, plus the system switch Hatches and the Z level must be visible.

Locked or hidden objects therefore stay out and are not caught by a following Del. Unlike a click on a locked element, Ctrl + A shows no hint with a padlock. The Properties panel shows the common attributes of the selection.

Very large selection

Up to the glow limit — in the Settings dialog the line Glow up to: … elements, factory 1000; a single element counts 1, a block insertion all its parts — the selected elements are drawn blue with a glow. If the selection is larger, they keep their normal colour, and only a dashed frame around everything selected shows the selection. This keeps large drawings fast: without this simplification the first frame after Ctrl + A takes seconds to minutes in a drawing with very many blocks.

After Ctrl+A in a plate with 108 block insertions (more than 1000 parts together, limit 1000): (1) the dashed selection frame, (2) the elements inside keep their normal colour, no blue
After Ctrl + A above the limit: (1) the dashed selection frame around everything selected, (2) the elements inside keep their normal colour

All commands act on the whole selection as usual (gizmo, Del, move …); you just can no longer see which elements inside the frame are selected. If you always want to see the blue selection, set the limit to 0. Details: Very large selection, Glow up to … elements.

Options

None. The selection filter does not apply here. How the selection is displayed depends on the glow limit (see above).

Related commands

Related topics