Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › E Dialogs › Header bar above the drawing area

Header bar above the drawing area

The narrow bar between ribbon (or classic toolbar) and drawing area shows the structure switches needed constantly while drawing. It stays visible with every tool.

(1) Layer, (2) Z level, (3) Pick up, (4) Live constraints, (5) Isolate, (6) Hide, (7) Show all
(1) Layer, (2) Z level, (3) Pick up, (4) Live constraints, (5) Isolate, (6) Hide, (7) Show all — left halfleft half
(1) Layer, (2) Z level, (3) Pick up, (4) Live constraints, (5) Isolate, (6) Hide, (7) Show all — right halfright half
(1) Layer, (2) Z level, (3) Pick up, (4) Live constraints, (5) Isolate, (6) Hide, (7) Show all

Layer

Colour dot and drop-down of the active layer (“n: Name” and “Auto”). The choice makes the layer active (status bar “Layer: Name”) or switches the auto mode on (“Layer mode: auto (from the object)”). The same choice as in the “Layers” section.

Z level

Drawing Z level for new objects; “−” and “+” change it by one step (“Drawing Z level: n”). See Z levels.

The Z level part of the header bar
The Z level part of the header bar

💉 Pick up [J]

Arms “Pick up attributes” (key J as well): the next click on an element adopts layer and properties for further drawing; the button turns orange, Esc cancels. The picked-up values apply only to newly drawn elements — not to copies, undo, opening or inserted standard parts. See Pick up attributes.

The button in its armed state
The button in its armed state

⛓ Live constraints

Switch for constraints while drawing (factory off). Switched on, it has a blue background: line, rectangle as separate lines, slot and curved slot then get the constraints they satisfy exactly as soon as they are drawn — for example “Horizontal” on a horizontal line or “Perpendicular” at the corners of a rotated rectangle; the geometry does not move. Message “Live constraints ON — line, rectangle, slot and curved slot get the constraints they already satisfy while drawing” / “Live constraints OFF”. The setting is saved and travels with the drawing. See Live constraints while drawing.

◐ Isolate, ◌ Hide, ◉ Show all

The session view: show only the selection, take the selection out of view (continuous mode, button blue), bring everything back (“Show all” blue as long as something is isolated or hidden). Never saved. See Isolate and hide.

After isolating, “Show all” glows
After isolating, “Show all” glows

Related topics

Related topics