How do I insert a standard part?
- Type into the search field of the panel Standard parts, e.g. 4762 M6 — or click through the folder tiles.
- Tick Insert as block if the part should count in the parts list.
- Click the tile of the part. It hangs at the mouse at its insertion point. Custom BOM fields of the part are added to the BOM fields of the drawing.
- Rotate with R (90°) or type the angle into the placement HUD; 📐 Measure angle takes a direction from the drawing. If the cursor is still in the field Angle, R and the snap keys work all the same.
- Click the target point with snap. Every further click places another part; Esc ends.


Grip the part at another point
Press B and click a snap point of the orange frozen part — it becomes the new grip.
Part on the active layer
With the check box On current layer the part lands on the active layer instead of creating its layers NT-Kontur, NT-Mittellinie etc. — together with its hatches and the content of its blocks, also with Insert as block. The preview at the mouse already shows it in the colour and width of the layer. Only a block definition the drawing already has keeps its layers.
Part from your own computer
Insert a local standard part opens a standard part file without a server.
Undo and errors
Ctrl + Z after placing also undoes what the part brought along (block definitions, layers, BOM fields), as long as it is not used anywhere else. If the standard part file is damaged, the drawing stays unchanged and the status bar reports in red “‹name›” not inserted — drawing unchanged (reason); individual unreadable values are cleaned up (⚠ n damaged entries cleaned up · …). If the part still hangs at the mouse when you choose Open… or New drawing, it lands in the new drawing.