Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › B How-to › How do I create a parts list?

How do I create a parts list?

  1. Draw every purchased part and every assembly as a block — or insert standard parts with the check box Insert as block.
  2. Maintain the BOM data per block: right-click on an instance → 🧩 BOM data…, enter designation, article number, material etc., Save. The form shows the fields of the drawing, including custom ones (see Custom fields). When an insertion is selected, the Properties panel shows its BOM data together with n× in the drawing · m× in total.
  3. In the ribbon click BOM in the Annotate group (below Leader; the classic toolbar has the same button), or click 📋 Parts list (BOM) in the panel Blocks. The dialog counts all instances. If there are hidden blocks or insertions on hidden layers, it asks whether they are counted; the answer applies to this drawing. In the block editor the parts list is locked.
  4. Switch at the top between Quantity BOM (identical parts merged) and Structured BOM (assemblies as a tree).
Dialog «Parts list» with the two views and the output buttons: (1) Quantity BOM, (2) Structured BOM, (3) Insert into drawing, (4) Export CSV
Dialog Parts list: (1) Quantity BOM, (2) Structured BOM, (3) Insert into drawing, (4) Export CSV

The columns follow the field selection of the drawing. A numeric field with the sum type Qty × value gets the column … total; the last row Total adds up the fields that have a sum.

Dissolve an assembly

If an assembly should count its single parts instead of appearing as one part, clear the check box List as a single part in the BOM in its BOM data. The structured BOM then shows items like 2.1 (As a single part).

Insert into the drawing

Insert into drawing attaches the list as a table block to the mouse; click its position. The table is live: it follows the drawing — quantities, parts, values, field selection and language — and has a total row. The parts list inserted last is the governing one: the position balloons show its numbers. To make another parts list governing, right-click it → 📍 Position balloons follow this parts list; the governing one carries a check mark.

Right-click on a live parts list: (1) Edit parts list…, (2) Position balloons follow this parts list
Right-click on a live parts list: (1) Edit parts list…, (2) Position balloons follow this parts list

A live parts list cannot be changed with Edit block; for a fixed version that no longer follows the drawing, Explode it. Parts lists inserted with a program version before 4.0.1 are snapshots; right-click → 🔄 Replace with live parts list turns one into a live parts list (contents changed by hand are lost; the program asks first).

The inserted live parts list with total row
The inserted live parts list with total row

Edit the parts list

A double-click on the inserted parts list (or right-click → 📋 Edit parts list…) opens the Edit parts list window. There you override cells with your own text — the data of the blocks stay unchanged:

  • Select a cell and type (or double-click, Enter, F2); overridden cells are tinted and marked only in the window, the drawing and the printout stay neutral. Del restores the original.
  • The No. can be overridden as well; the table orders itself by the number, and the position balloons follow.
  • + Free row adds a row without a part and without a balloon, for small material for instance.
  • Via right-click on a cell, ⇢ Take value over into block data copies the value into the BOM data of the block.
  • Overrides for parts that are no longer in the drawing are listed below the table with Assign… and Delete; if the part comes back, they apply again.
  • The eye at the far right (or Ctrl + E) hides a row: it is then missing from the drawn table, the total and the position balloons. 🔢 Renumber numbers the visible parts consecutively.
  • Right-clicking a column header hides columns (Hide column, Show/hide columns…) and sets their alignment — both also apply to the drawn table. A click on the header sorts (only in the window), dragging its edge changes the width.
  • 📋 To clipboard copies the visible table tab-separated, for Excel for instance.

OK applies everything in one undo step, Cancel discards. Details: Table editor.

“Edit parts list” window: (1) overridden cell, (2) free row, (3) OK
Edit parts list window: (1) overridden cell, (2) free row, (3) OK

Custom fields and field selection

Which fields the parts list shows and in which order is set in the BOM fields window: in the BOM data form via Manage fields… or via the command search BOM fields…. The check box In BOM shows or hides a field, ↑ and ↓ reorder; No. and Qty always come first. There you also create custom fields (text, number with unit, sum). The fields belong to the drawing; the template for new drawings is in the settings under ☰ BOM fields (template)….

Export as CSV

Export CSV downloads stueckliste.csv with the columns of the parts list (without your own field selection, the eleven fixed columns); if creating it fails, the status bar reports it in red and no file is created; the file opens directly in Excel or LibreOffice Calc.

Related topics