Skip to content
LiberoDraft LiberoDraft Help
Deutsch
Start › B How-to › Printing from the model to scale

Printing from the model to scale

Goal

A printout on A4 landscape at 1:2, margins 10 mm, with a frame.

Steps

  1. Ctrl + P — the print dialog appears and the print area hangs from the pointer.
  2. Choose paper A4 (1) and orientation Landscape (2), enter the scale 1 : 2 (3) and leave the margins at 10 mm (4).
  3. Place the area over the drawing and fix it with a click (“Print area fixed …”). If it sits wrong, click again and place it anew.
  4. Before printing, check the line widths (7): with “From drawing” every element prints with its own attributes.
  5. “🖨 Print” (9). In the browser window choose “Margins: None” and 100 % scaling, then print or save as PDF.

Each scale field accepts values from 0.001 to 1 000 000. If printing fails, the status bar reports in red Printing failed (reason); the Print window stays open, and the dimension settings stay as they were.

(1) paper, (2) orientation, (3) scale, (4) margins, (7) line widths, (9) Print
(1) paper, (2) orientation, (3) scale, (4) margins, (7) line widths, (9) Print
The fixed print area over the drawing
The fixed print area over the drawing

Result

The printout shows exactly the framed section at half the size of the drawing; the bottom right carries the file name, scale and paper format (for example Lagerplatte — 1:2 — A4 Quer — this footer is written in German, also in the English interface).

The printed page
The printed page
Tip

If the printed length differs from the drawing, set up the print calibration once — it then applies to every printout.

Related topics