Message index A–Z

This page lists all wordings LiberoDraft shows in the status bar, in tooltips, in notice windows and as a question of the browser. They are given as the program outputs them — including where umlauts are missing or a text stays German in every language. Italic parts such as n or Name are filled in by the program.

The index is rebuilt with every build from the pages of this section and is therefore complete after every release. If you are looking for one wording, the search is usually quicker; for browsing, this page is the right place.

1012 wordings

0-9

• 1 chain dimension selectedDimensioning messages
• 1 dimension selectedDimensioning messages
• 1 file(s) were changed or removed since the selection — please choose the folder againMessages for file and tools
• 1 from the cacheMessages for file and tools
• 1st element modified to the intersectionMessages when modifying
• 2 newly renderedMessages for file and tools
• 2nd element...Messages while drawing
• 2nd point of the mirror axis...Messages when modifying
• 2nd point too far from the circle — cancelledMessages when modifying
• 2nd point too far from the ellipse — cancelledMessages when modifying
• 2nd point…Messages while drawing
• 3 filesMessages for file and tools
• 3 files, 2 images rendered…Messages for file and tools
• 3rd element...Messages while drawing
• 3rd pointMessages while drawing

A

• A block cannot contain itselfMessages about blocks, parts lists and standard parts
• A group cannot be moved into itself or into one of its subgroupsMessages on layers, groups, Z levels and constraints
• Abbrechen = Import abbrechenMessages about blocks, parts lists and standard parts
• Abstand zwischen parallelen Linien:Messages on layers, groups, Z levels and constraints
• Active layer is locked/hidden — frame and title block inserted on layer “name”Messages about paper space
• Active layer is locked/hidden — frame and title block inserted on layer “Name”Messages on layers, groups, Z levels and constraints
• Active viewport: drag moves the model view, mouse wheel changes the scale — double-click outside finishesMessages about paper space
• Active Z level: nMessages on layers, groups, Z levels and constraints
• Add-on tools: invalid handoffMessages for file and tools
• Add-on tools: manifest not found or invalidMessages for file and tools
• Added to favouritesMessages about start, files, selection and navigation
• All groups hiddenMessages on layers, groups, Z levels and constraints
• All groups lockedMessages on layers, groups, Z levels and constraints
• All groups shownMessages on layers, groups, Z levels and constraints
• All groups unlockedMessages on layers, groups, Z levels and constraints
• All guides deletedMessages on layers, groups, Z levels and constraints
• All layers hiddenMessages on layers, groups, Z levels and constraints
• All layers lockedMessages on layers, groups, Z levels and constraints
• All layers shownMessages on layers, groups, Z levels and constraints
• All layers unlockedMessages on layers, groups, Z levels and constraints
• An arc cannot be constructed with these valuesMessages while drawing
• Angle adopted: a° — preview alignedMessages about blocks, parts lists and standard parts
• Angle a° locked — now just set the length (mouse or L + Enter), Esc cancelsMessages while drawing
• Angle dimension from 3 points placedDimensioning messages
• Angle from 3 points: click a point on the 1st leg…Dimensioning messages
• Angle from 3 points: click a point on the 2nd leg…Dimensioning messages
• angle from the originMessages about start, files, selection and navigation
• Angle measurement cancelled — the previous angle remainsMessages about blocks, parts lists and standard parts
• Angle too smallMessages when modifying
• Angular dimension placedDimensioning messages
• another target point or ESCMessages when modifying
• Apply dimension attributes: choose dimensions — Enter or right-click accepts, ESC cancelsDimensioning messages
• arcMessages on layers, groups, Z levels and constraints
• Arc length dimension placedDimensioning messages
• Arc length dimension: please click an arcDimensioning messages
• Arc not possibleMessages while drawing
• arc slot drawn — group “Name”Messages on layers, groups, Z levels and constraints
• Arc split at (x, y) → 2 piecesMessages when modifying
• Arc trimmedMessages when modifying
• Area closed — Enter/„Hatch" creates it, more elements selectable as islandsHatch messages
• Array (rectangular): enter rows × columns × dX × dY → EnterMessages when modifying
• Array r×c: n element copies createdMessages when modifying
• Array: at least 2 rows or 2 columnsMessages when modifying
• Array: nothing to copyMessages when modifying
• Arrow tip set — click the 2nd point (text end)Messages for file and tools
• At least 2 intersections neededMessages when modifying
• At least one layer requiredMessages on layers, groups, Z levels and constraints
• Attention: no object type is ticked — so nothing can be selected.Messages on layers, groups, Z levels and constraints
• Attributes adopted: layer Name + Override (Farbe, Linientyp, Staerke) + TextstilMessages on layers, groups, Z levels and constraints
• auto-weld: offMessages about settings, grid and snap
• Axis cross cancelledMessages for file and tools
• Axis cross inserted: n circle(s)/arc(s), m element(s)Messages for file and tools
• Axis cross: choose target circles — click or rubber band, buttons AllMessages for file and tools
• Axis endpoint (1st semi-axis)…Messages while drawing
• Axis too shortMessages while drawing
• ⚠ A and B must be a lineMessages on layers, groups, Z levels and constraints

B

• B or ESC cancelsMessages about blocks, parts lists and standard parts
• Balloon n placed — click the next block instance (ESC ends)Messages about blocks, parts lists and standard parts
• Balloon textMessages about blocks, parts lists and standard parts
• Balloons show quantity-BOM item numbersMessages about blocks, parts lists and standard parts
• Balloons show structured item numbersMessages about blocks, parts lists and standard parts
• Base point selection cancelledMessages about blocks, parts lists and standard parts
• Base point selection cancelled — Ctrl+V pastes centeredMessages when modifying
• Base point set — Ctrl+V pastes at the cursor (angle/factor/mirror adjustable)Messages when modifying
• Baseline dimension: click base point (use snap)...Dimensioning messages
• Bisector createdMessages while drawing
• Block "Name" created — n element(s)Messages about blocks, parts lists and standard parts
• Block "Name" existiert in dieser Zeichnung bereits. OK = als Kopie importierenMessages about blocks, parts lists and standard parts
• Block "Name" exported: Name.ldblk (incl. n nested)Messages about blocks, parts lists and standard parts
• Block "Name" hiddenMessages about blocks, parts lists and standard parts
• Block "Name" loaded — a click places it (hanging at the mouse), ESC finishesMessages about blocks, parts lists and standard parts
• Block "Name" shownMessages about blocks, parts lists and standard parts
• Block "Name": a click places it (multiple times)Messages about blocks, parts lists and standard parts
• Block definition deletedMessages about blocks, parts lists and standard parts
• Block editing cancelled — no changes appliedMessages about blocks, parts lists and standard parts
• Block editor: „Name" — edit the geometry with all tools, then Save or CancelMessages about blocks, parts lists and standard parts
• Block export failed: …Messages about blocks, parts lists and standard parts
• Block import cancelled — "Name" already existedMessages about blocks, parts lists and standard parts
• Block import error: …Messages about blocks, parts lists and standard parts
• Block is contained in “Name” — remove it there firstMessages about blocks, parts lists and standard parts
• Block is still in use — delete/explode all instances firstMessages about blocks, parts lists and standard parts
• Block name:Messages about blocks, parts lists and standard parts
• Block not foundMessages about blocks, parts lists and standard parts
• Block placed (n×) — keep clicking or ESC to finishMessages about blocks, parts lists and standard parts
• Block „Name" saved — n element(s); all instances updatedMessages about blocks, parts lists and standard parts
• Block: the elements inside the block cannot be dimensioned individuallyDimensioning messages
• BOM data saved: NameMessages about blocks, parts lists and standard parts
• Both elements joined at the intersectionMessages when modifying
• Both endpoints are welded — there is no free end that could move. Release one end first (unweld), then it will work.Messages about settings, grid and snap
• Both legs point in the same direction — click a different pointDimensioning messages
• Both points identical — cancelledMessages when modifying
• Both values must be > 0Messages for file and tools
• Break: type not supportedMessages when modifying
• Brought to front (n objects)Messages on layers, groups, Z levels and constraints

C

• CAM offset cancelledMessages when modifying
• CAM offset measure: click the first pointMessages when modifying
• CAM offset measure: click the second pointMessages when modifying
• CAM offset works in model space onlyMessages when modifying
• CAM offset: click an elementMessages when modifying
• CAM offset: distance d measuredMessages when modifying
• CAM offset: distance follows the mouse againMessages when modifying
• CAM offset: distance too small — move the mouse further away or enter a valueMessages when modifying
• CAM offset: enter the distance or createMessages when modifying
• CAM offset: junction — click the continuation (n options)Messages when modifying
• CAM offset: measured distance is zeroMessages when modifying
• CAM offset: n element(s) created, distance dMessages when modifying
• CAM offset: n elements selected (closed)Messages when modifying
• CAM offset: no contour element at the click point (line/arc/circle/ellipse/polyline/spline/rectangle)Messages when modifying
• CAM offset: no contour element at the clicked pointMessages when modifying
• CAM offset: no valid path — the offset is too large for this contourMessages when modifying
• CAM offset: preview paused — overwrite the value or createMessages when modifying
• CAM offset: select geometry firstMessages when modifying
• Cancel = export all elementsMessages about printing and exporting
• Cancel = leave outMessages about blocks, parts lists and standard parts
• Cancel = model contentMessages about printing and exporting
• CancelledMessages for file and tools
• CancelledMessages about start, files, selection and navigation
• CancelledMessages about paper space
• Cancelled — select modeMessages about start, files, selection and navigation
• Cannot replace: would create a cycle (block)Messages about blocks, parts lists and standard parts
• Careful — layer "Name" holds: … Continue?Messages on layers, groups, Z levels and constraints
• Centroid inserted as a pointMessages about start, files, selection and navigation
• Chain dimension insertedDimensioning messages
• Chain dimension: click 1st point (use snap)...Dimensioning messages
• Chain extended to the new pointDimensioning messages
• Chamfer createdMessages when modifying
• Chamfer: click the 2nd line (on the side to keep)Messages when modifying
• Chamfer: enter the values + Enter, or click to confirmMessages when modifying
• Choose a folder or files — drawings (.cad2d), standard parts (.json) and blocks (.ldblk) appear with a preview image. The folder has to be chosen again in every session (browsers do not remember folders); the images stay cached in the browser.Messages for file and tools
• Choose element n for type...Messages on layers, groups, Z levels and constraints
• Choose the 2nd element for type...Messages on layers, groups, Z levels and constraints
• Choose the angle sector with the mouse, then click...Dimensioning messages
• circleMessages on layers, groups, Z levels and constraints
• Circle brokenMessages when modifying
• Circle split into 2 arcs @ x, yMessages when modifying
• Circle trimmedMessages when modifying
• Circle: click the second split position (ESC = cancel)Messages when modifying
• Circles: split first, then form the corner with the arcMessages when modifying
• Circles: split first, then modify the arcMessages when modifying
• Class „H7" for nominal size 40 mm not found in toleranzen.json — add it there if neededDimensioning messages
• Classic toolbar — F2 (or Ctrl+Shift+R) switches to the ribbonMessages about settings, grid and snap
• Cleaned up: 1 element removedMessages for file and tools
• Cleaned up: n elements converted/exploded, m removedMessages for file and tools
• Cleaned up: n elements removedMessages for file and tools
• Cleanup works on the model — switched to model spaceMessages for file and tools
• click = placeMessages when modifying
• Click a circle or arc — the click side picks the tangentMessages while drawing
• Click a circle/arc or a lineMessages while drawing
• Click a line or arcMessages while drawing
• Click a line to alignMessages about settings, grid and snap
• Click a line, circle or arcMessages when modifying
• Click a point for the new pivotMessages about settings, grid and snap
• Click an elementMessages when modifying
• Click an elementMessages while drawing
• Click an endpoint to editMessages about settings, grid and snap
• Click or type the end angle — counter-clockwiseMessages while drawing
• Click radius and start angle — or type them (Enter)Messages while drawing
• Click the 1st line (on the side to keep)Messages when modifying
• Click the 1st line of the bisectorMessages while drawing
• Click the 2nd element (line/circle/arc)Messages when modifying
• Click the 2nd element (line/circle/arc)...Messages when modifying
• Click the 2nd element…Messages while drawing
• Click the 2nd lineMessages when modifying
• Click the 2nd lineMessages while drawing
• Click the 2nd point for the dimension...Dimensioning messages
• Click the arc centreMessages while drawing
• Click the end angle or enter the angle...Messages while drawing
• Click the endpoint or enter R + angle…Messages while drawing
• Click the endpoint…Messages while drawing
• Click the first circle or arcMessages while drawing
• Click the first semicircle centreMessages while drawing
• Click the new insertion point on the orange previewMessages about blocks, parts lists and standard parts
• Click the next point — Enter or double-click ends the runMessages while drawing
• Click the opposite cornerMessages about paper space
• Click the point for the new chain dimension (use snapping), ESC cancelsDimensioning messages
• Click the second circle or arc — the click sides pick the tangentMessages while drawing
• Click the second semicircle centreMessages while drawing
• Click the side — the second line lies thereMessages while drawing
• Click the start point — the double line starts thereMessages while drawing
• Click the start point — the tangent starts thereMessages while drawing
• Click the target lineMessages while drawing
• Click the target line — the perpendicular is dropped from the point onto itMessages while drawing
• Click the target line — the tangent ends perpendicular on itMessages while drawing
• Click the target pointMessages when modifying
• Click the target point — multiple times possibleMessages when modifying
• Click the target point — or enter dX/dY + EnterMessages when modifying
• Closed spline opened at (x, y)Messages when modifying
• Closed spline: please split it first (W)Messages when modifying
• Coincident: points joinedMessages on layers, groups, Z levels and constraints
• Coincident: the point lies on the elementMessages on layers, groups, Z levels and constraints
• Command: choose dimensions — Enter or right-click accepts, ESC cancelsMessages when modifying
• Connection point cannot be determinedMessages while drawing
• Constraint deletedMessages on layers, groups, Z levels and constraints
• Constraint: typeMessages on layers, groups, Z levels and constraints
• Constraint: type appliedMessages on layers, groups, Z levels and constraints
• Constraints visibleMessages on layers, groups, Z levels and constraints
• Constraints visibleMessages on layers, groups, Z levels and constraints
• Coordinate entry applies to the start point — this function is already drawingMessages about start, files, selection and navigation
• Coordinate entry: choose a drawing tool first (line, rectangle, circle, arc, polyline, point)Messages about start, files, selection and navigation
• Coordinate table cancelledMessages for file and tools
• Coordinate table placed (n elements) — new group "name"Messages for file and tools
• Coordinate table placed — new group "Name"Messages on layers, groups, Z levels and constraints
• Coordinate table: a click places the table (top-left corner)Messages for file and tools
• Copied — click the base point (with snap)Messages when modifying
• Copy not possibleMessages about start, files, selection and navigation
• corners = sizeMessages about paper space
• Could not open the block editorMessages about blocks, parts lists and standard parts
• Could not trim/extendMessages when modifying
• create in the dialog or right-clickMessages when modifying
• CSV export failedMessages about blocks, parts lists and standard parts
• Ctrl+click opens: addressMessages for file and tools
• Curved slot drawn — group “name” (width b)Messages while drawing
• Curved slot: please set the radius firstMessages while drawing
• Curved slot: start and end angle are too close togetherMessages while drawing
• Curved slot: the width is too large for the radiusMessages while drawing
• Cut: please select elements first (dimensions and hatches travel with their elements)Messages when modifying
• Cut: please select elements first (dimensions and hatches travel with their elements)Dimensioning messages
• … Copy the contents there anyway?Messages on layers, groups, Z levels and constraints
• ⚠ Click a point first (the “Point” tool places them)Messages on layers, groups, Z levels and constraints
• ⚠ Concentric needs two circles or arcsMessages on layers, groups, Z levels and constraints
• ⚠ Conflict: both lines are horizontal — cannot become perpendicularMessages on layers, groups, Z levels and constraints
• ⚠ Conflict: one line is horizontal, the other vertical — cannot become parallelMessages on layers, groups, Z levels and constraints
• ⚠ Conflict: the lines are already perpendicular to each otherMessages on layers, groups, Z levels and constraints
• ⚠ Conflict: the lines are already perpendicular — cannot be collinearMessages on layers, groups, Z levels and constraints

D

• Datum feature A changedDimensioning messages
• Datum feature A placedDimensioning messages
• Datum feature A: click position of the box (ESC cancels)Dimensioning messages
• Datum feature: click point on the element (use snap)...Dimensioning messages
• Define the bulgeMessages while drawing
• Degenerate angle (lines opposing)Messages while drawing
• Delete block definition Name permanently?Messages about blocks, parts lists and standard parts
• Delete dimension style “Name”?Dimensioning messages
• Delete group "Name" and its n object(s)? (Undo possible with Ctrl+Z)Messages on layers, groups, Z levels and constraints
• Delete layout “name” permanently? All sheet elements of this layout will be lost (cannot be undone).Messages about paper space
• Delete print profile "name"?Messages about printing and exporting
• Delete profile "name"?Messages about settings, grid and snap
• Delete unused blocks?Messages about blocks, parts lists and standard parts
• Dimension arrow insideDimensioning messages
• Dimension arrow outsideDimensioning messages
• Dimension arrow side 1 hiddenDimensioning messages
• Dimension arrow side 2 shownDimensioning messages
• Dimension attributes adopted (driven, size, mm)Dimensioning messages
• Dimension attributes adopted (driving, size, unit)Messages on layers, groups, Z levels and constraints
• Dimension chain dissolved — n individual dimensionsMessages when modifying
• Dimension chain dissolved — n individual dimensionsDimensioning messages
• Dimension is now DETACHED (free value)Dimensioning messages
• Dimension is now DRIVEN (reference)Dimensioning messages
• Dimension is now DRIVINGDimensioning messages
• Dimension n placed — click next point, ESC finishesDimensioning messages
• Dimension placedDimensioning messages
• Dimension series finishedDimensioning messages
• Dimension settings savedDimensioning messages
• Dimension style nameDimensioning messages
• Dimension style not foundDimensioning messages
• Dimension style “Name” appliedDimensioning messages
• Dimension style “Name” deletedDimensioning messages
• Dimension style “Name” savedDimensioning messages
• Dimension text updatedDimensioning messages
• Dimension type: Diameter (⌀)Dimensioning messages
• Dimension type: Radius (R)Dimensioning messages
• Dimension — snap mode → automaticDimensioning messages
• Dimensions hiddenMessages on layers, groups, Z levels and constraints
• Dimensions visibleMessages on layers, groups, Z levels and constraints
• Direction adopted — enter the distance + Enter, or click (the mouse determines the side)Messages when modifying
• Direction via line: click a line that defines the stretch directionMessages when modifying
• Discard unsaved changes?Messages about start, files, selection and navigation
• Disclaimer confirmed — the info box is no longer shown automatically at startupMessages about settings, grid and snap
• Disclaimer confirmed — the info box is no longer shown automatically at startupMessages about start, files, selection and navigation
• Distance dimension placedDimensioning messages
• Distribute points: click an element (ESC ends)Messages for file and tools
• Distribute points: please click an element (line, circle, arc, polyline, …)Messages for file and tools
• Double line drawn (n segments, gap a)Messages while drawing
• Double line: at least two points neededMessages while drawing
• double-click = pan/zoom the model through the viewportMessages about paper space
• double-click = pan/zoom the model through the viewportMessages about paper space
• double-click the field = continue selectingMessages when modifying
• double-click the field = live againMessages when modifying
• Downloaded: name.cad2dMessages about start, files, selection and navigation
• drag = selection boxMessages about paper space
• Drag or enter the radius…Messages while drawing
• Drawing "name" inserted at original coordinatesMessages about start, files, selection and navigation
• Drawing info appliedMessages about settings, grid and snap
• Drawing Z level: nMessages on layers, groups, Z levels and constraints
• Driven (reference) dimension — not editableDimensioning messages
• driving dimensions keep their valuesMessages when modifying
• dX/dY + EnterMessages when modifying
• DXF error: reasonMessages about start, files, selection and navigation
• DXF import error: reasonMessages for file and tools
• DXF imported (drop): n entitiesMessages about start, files, selection and navigation
• DXF imported: n entities from nameMessages for file and tools
• DXF opened: n entities from fileMessages about start, files, selection and navigation

E

• Element belongs to a locked group — unlock the group to editMessages on layers, groups, Z levels and constraints
• Element is hidden by the selection filterMessages about start, files, selection and navigation
• Element is on locked layer “Name” — unlock the layer to editMessages on layers, groups, Z levels and constraints
• Element not supportedMessages for file and tools
• Element(s) pasted (n×) — keep clicking or ESC to finishMessages about blocks, parts lists and standard parts
• Element(s) pasted.Messages when modifying
• Element(s) pasted.Messages about blocks, parts lists and standard parts
• Element: element dimensioning not possible — right-click → Explode converts it to lines/arcs; point snap (endpoints) always worksDimensioning messages
• elements selectable againMessages when modifying
• Ellipse brokenMessages when modifying
• Ellipse split into 2 arcsMessages when modifying
• Ellipse trimmedMessages when modifying
• Ellipse: click the second split position (ESC = cancel)Messages when modifying
• Elliptical arc brokenMessages when modifying
• Elliptical arc split → 2 piecesMessages when modifying
• Elliptical arc trimmedMessages when modifying
• empty = dimension line onlyDimensioning messages
• Empty group "Name" createdMessages on layers, groups, Z levels and constraints
• Empty subgroup "Name" created in "Parent"Messages on layers, groups, Z levels and constraints
• Endpoint lies on the tangent - no arc possibleMessages while drawing
• EnterMessages about start, files, selection and navigation
• EnterMessages about start, files, selection and navigation
• enter D for an exact valueMessages when modifying
• enter D for an exact valueMessages when modifying
• Enter the diameter or click...Messages while drawing
• enter the distance or createMessages when modifying
• Enter the factor or drag the mouse, click/Enter confirms...Messages when modifying
• Enter the field — Enter confirms, ESC cancelsMessages on layers, groups, Z levels and constraints
• Enter the radius or click...Messages while drawing
• Error while loading: reasonMessages about start, files, selection and navigation
• Error: invalid angle geometryDimensioning messages
• Error: no intersectionDimensioning messages
• Error: reasonMessages about settings, grid and snap
• Error: reasonMessages about start, files, selection and navigation
• ESC = cancelMessages when modifying
• ESC = cancelMessages when modifying
• ESC = cancelMessages when modifying
• ESC = cancelMessages when modifying
• ESC = cancelMessages when modifying
• ESC = cancelMessages about settings, grid and snap
• ESC = cancelMessages about settings, grid and snap
• ESC = cancelMessages about settings, grid and snap
• ESC = endMessages when modifying
• ESC = without, paste centeredMessages when modifying
• ESC cancelsMessages about blocks, parts lists and standard parts
• ESC/right-click cancelsMessages for file and tools
• ESC/right-click finishesMessages when modifying
• ESC/right-click finishesMessages about blocks, parts lists and standard parts
• ESC/right-click finishesMessages about blocks, parts lists and standard parts
• Everything is already on the lowest Z level (z)Dimensioning messages
• Everything is already on the lowest Z level (z)Messages on layers, groups, Z levels and constraints
• Exclude group from printingMessages about printing and exporting
• Exploded: n element(s) → k linesMessages when modifying
• Export failedMessages about blocks, parts lists and standard parts
• Export in paper space: the model content is exportedMessages for file and tools
• Export in paper space: the model content is exportedMessages about printing and exporting
• Export paper space — OK = sheet, flattened (scale applied)Messages about printing and exporting
• Extend cancelledMessages when modifying
• Extend/shorten appliedMessages when modifying
• Extend/shorten arc: drag, or type an amount (±) + Enter — [W] angle/length, Esc cancelsMessages when modifying
• Extend/shorten line: drag, or type an amount (±) + Enter — Esc cancelsMessages when modifying
• ⚠ Elements A and B must be differentMessages on layers, groups, Z levels and constraints
• ⚠ Exactly 3 elements needed: point, A, BMessages on layers, groups, Z levels and constraints

F

• Factory presets cannot be deletedDimensioning messages
• Factory type — use “Save as…” to modifyDimensioning messages
• Feature control frame changedDimensioning messages
• Feature control frame: click arrow target on the element...Dimensioning messages
• Feature control frame: click position (ESC cancels)Dimensioning messages
• Filter set to the picked element (object): color …Messages on layers, groups, Z levels and constraints
• First select the elements of the blockMessages about blocks, parts lists and standard parts
• First side too shortMessages while drawing
• Form tolerances are specified without a datum (ISO 1101).Dimensioning messages
• Frame and title block inserted — n elements (freely editable)Messages about paper space
• Free balloon (no reference): click a position — edit the text by double-clickingMessages about blocks, parts lists and standard parts
• Free balloon: click its position — edit the text via double-clickMessages about blocks, parts lists and standard parts
• From drawing — the original attributes (line width & color) from the file are printedMessages about printing and exporting
• ★ Factory preset — it is part of the delivery and cannot be overwritten or deleted. Change the values as you like and save them under your own name with “Save as…”.Dimensioning messages

G

• Gizmo aligned to the line — U = parallel to the lineMessages about settings, grid and snap
• Gizmo hidden — Ctrl+Shift+G to show it againMessages about settings, grid and snap
• Gizmo mirrored: offMessages about settings, grid and snap
• Gizmo mirrored: U↺ V↺Messages about settings, grid and snap
• Gizmo OFFMessages about settings, grid and snap
• Gizmo OFFMessages about start, files, selection and navigation
• Gizmo OFF (Ctrl+Shift+G)Messages about settings, grid and snap
• Gizmo ONMessages about settings, grid and snap
• Gizmo ONMessages about start, files, selection and navigation
• Gizmo ON (Ctrl+Shift+G)Messages about settings, grid and snap
• Gizmo on world axesMessages about settings, grid and snap
• Gizmo orientation: a°Messages about settings, grid and snap
• Gizmo panel follows againMessages about settings, grid and snap
• Gizmo pick cancelledMessages about settings, grid and snap
• Gizmo pivot setMessages about start, files, selection and navigation
• Gizmo placed on the endpoint — the axes move only this pointMessages about settings, grid and snap
• Gizmo window follows the selected element againMessages about settings, grid and snap
• Gizmo window: position pinnedMessages about settings, grid and snap
• Gizmo Δ — U: u V: v (values stay editable)Messages about settings, grid and snap
• Gizmo — pivot at (x, y)Messages about settings, grid and snap
• Gizmo — ΔU: u ΔV: vMessages about settings, grid and snap
• Gizmo: world axes, auto pivotMessages about settings, grid and snap
• Global counter not reachableMessages about settings, grid and snap
• Grid contrast: n %Messages about settings, grid and snap
• Grid hidden — grid snap inactiveMessages about settings, grid and snap
• Grid manual: n mmMessages about settings, grid and snap
• Grid shownMessages about settings, grid and snap
• Grid: dynamicMessages about settings, grid and snap
• Grid: manual (n mm)Messages about settings, grid and snap
• Grip active (1 point) — click to place, Escape to cancelMessages when modifying
• Grip active (n points) — click to place, Escape to cancelMessages when modifying
• Grip placedMessages about start, files, selection and navigation
• Group "Name" created (n element(s), m dimension(s))Messages on layers, groups, Z levels and constraints
• Group "Name" deletedMessages on layers, groups, Z levels and constraints
• Group "Name" deleted with n subgroup(s) and m element(s)Messages on layers, groups, Z levels and constraints
• Group "Name" hiddenMessages on layers, groups, Z levels and constraints
• Group "Name" is attached to the mouse — click places the copyMessages on layers, groups, Z levels and constraints
• Group "Name" lockedMessages on layers, groups, Z levels and constraints
• Group "Name" moved into "Target"Messages on layers, groups, Z levels and constraints
• Group "Name" moved to the top levelMessages on layers, groups, Z levels and constraints
• Group "Name" placed after "Target"Messages on layers, groups, Z levels and constraints
• Group "Name" placed before "Target"Messages on layers, groups, Z levels and constraints
• Group "Name" selected (n elements, m dimensionsMessages on layers, groups, Z levels and constraints
• Group "Name" shownMessages on layers, groups, Z levels and constraints
• Group "Name" unlockedMessages on layers, groups, Z levels and constraints
• Group "Name" with n subgroup(s) is attached to the mouse — click places the copyMessages on layers, groups, Z levels and constraints
• Group "Name": all n object(s) locked or hidden — nothing selectedMessages on layers, groups, Z levels and constraints
• Group "Name": will be printedMessages on layers, groups, Z levels and constraints
• Group "Name": will NOT be printedMessages on layers, groups, Z levels and constraints
• Group is NOT printed — click: print againMessages about printing and exporting
• Group is printed — click: exclude from printingMessages about printing and exporting
• Group locking invertedMessages on layers, groups, Z levels and constraints
• Group name:Messages on layers, groups, Z levels and constraints
• Group renamedMessages on layers, groups, Z levels and constraints
• Group visibility invertedMessages on layers, groups, Z levels and constraints
• Grouping "Name" dissolved — the elements are keptMessages on layers, groups, Z levels and constraints
• Guide (w°) placed — place the next one or Esc finishesMessages on layers, groups, Z levels and constraints
• Guide (w°): click points one after another — Esc finishesMessages on layers, groups, Z levels and constraints
• Guides hiddenMessages on layers, groups, Z levels and constraints
• Guides shownMessages on layers, groups, Z levels and constraints

H

• H/V=mirrorMessages when modifying
• H/V=mirrorMessages about blocks, parts lists and standard parts
• H/V=mirrorMessages about blocks, parts lists and standard parts
• Half minor axisMessages while drawing
• Hatch attributes adopted (pattern Name, layer, opacity)Messages on layers, groups, Z levels and constraints
• Hatch attributes adopted (pattern pattern, layer, opacity)Hatch messages
• Hatch copied — same settings at the new spotHatch messages
• Hatch created in the viewport: patternMessages about paper space
• Hatch created in the viewport: patternHatch messages
• Hatch created: patternHatch messages
• Hatch created: pattern (n islands)Hatch messages
• Hatch pattern: pattern — settings apply immediatelyHatch messages
• Hatch seed point (bubble)Hatch messages
• Hatch selected — boundary highlighted; move the Z level with PageUp/PageDownHatch messages
• Hatch settings savedHatch messages
• Hatch: error during boundary searchHatch messages
• Hatch: error during calculationHatch messages
• Hatch: searching for the boundary …Hatch messages
• Hatches visibleMessages on layers, groups, Z levels and constraints
• hiddenMessages on layers, groups, Z levels and constraints
• Hidden (n in total) — ESC or right-click endsMessages on layers, groups, Z levels and constraints
• Hide endedMessages on layers, groups, Z levels and constraints
• Hide: please select elements firstMessages on layers, groups, Z levels and constraints
• Hinweistext (leer = kein Text):Messages for file and tools
• Hinweistext:Messages for file and tools
• Hole H7 @ 40 mm → upper +0.025Dimensioning messages

I

• Identical point — click a different pointDimensioning messages
• Identifier A is already in use. Use anyway?Dimensioning messages
• Image deletedMessages for file and tools
• Image from clipboard (w×h px) — click places it, ESC cancelsMessages for file and tools
• Image inserted (drop): fileMessages about start, files, selection and navigation
• Image inserted: name (w×h px)Messages for file and tools
• Image insertion cancelledMessages for file and tools
• Image placedMessages for file and tools
• Image scaled: w x h mmMessages for file and tools
• Image scaled: ×f (a → b)Messages for file and tools
• Image Z level: nMessages for file and tools
• Image Z level: nMessages on layers, groups, Z levels and constraints
• Images visibleMessages on layers, groups, Z levels and constraints
• Import error: reasonMessages about settings, grid and snap
• Insertion cancelledDimensioning messages
• Insertion point reset — the preview now hangs at this pointMessages about blocks, parts lists and standard parts
• Invalid count (1–1000)Messages for file and tools
• Invalid diameterMessages while drawing
• Invalid standard part fileMessages about blocks, parts lists and standard parts
• Invalid value — the dimension stays drivenDimensioning messages
• Item balloon n: click its positionMessages about blocks, parts lists and standard parts
• Item balloon: click an element (ESC ends)Messages about blocks, parts lists and standard parts

J

• Junction: click the continuationMessages when modifying

K

• k locked/hidden skipped)Messages on layers, groups, Z levels and constraints
• k not stretchable, skippedMessages when modifying
• Keine Elemente gewaehltMessages about start, files, selection and navigation

L

• LandscapeMessages about printing and exporting
• Language: EnglishMessages about settings, grid and snap
• Layer "Name" deleted — n object(s) moved to layer "Target"Messages on layers, groups, Z levels and constraints
• Layer "Name" deleted — n object(s) removedMessages on layers, groups, Z levels and constraints
• Layer "Name" is locked!Messages on layers, groups, Z levels and constraints
• Layer "Name" is locked. Move its contents anyway?Messages on layers, groups, Z levels and constraints
• Layer "Name" updatedMessages on layers, groups, Z levels and constraints
• Layer locking invertedMessages on layers, groups, Z levels and constraints
• Layer mode: auto (from the object)Messages on layers, groups, Z levels and constraints
• Layer mode: auto — the result takes the layer of the clicked objectMessages on layers, groups, Z levels and constraints
• Layer visibility invertedMessages on layers, groups, Z levels and constraints
• Layer: NameMessages on layers, groups, Z levels and constraints
• Layout deletedMessages about paper space
• Layout name:Messages about paper space
• Leader attachment movedMessages for file and tools
• Leader changedMessages for file and tools
• Leader placedMessages for file and tools
• Leaders visibleMessages on layers, groups, Z levels and constraints
• Line at relative angle createdMessages while drawing
• Line brokenMessages when modifying
• Line chosen — click the split position (ESC = cancel)Messages when modifying
• Line split at (x, y) → 2 piecesMessages when modifying
• Line trimmedMessages when modifying
• Line type settings applied — the pattern values apply to new objectsMessages about settings, grid and snap
• Line type settings applied — the pattern values apply to new objectsMessages on layers, groups, Z levels and constraints
• Link opened: addressMessages for file and tools
• Loading drawing …Messages about start, files, selection and navigation
• lower 0 mmDimensioning messages

M

• Manual area definition cancelledHatch messages
• Manual area: click boundary elements (including crossing ones) — as soon as an area closes it is filled; further loops inside become islands. Enter/“Hatch” creates it, ESC cancelsHatch messages
• Manual area: n element(s) chosen — boundary not yet closedHatch messages
• Manual area: no closed boundary yet — choose more (including crossing) elementsHatch messages
• Manual area: no element hit (n chosen)Hatch messages
• Manual area: no elements chosen yetHatch messages
• Manual hatch created: pattern — mode stays MANUAL: next area selectable (radio "Automatic" ends)Hatch messages
• Measure angle (auto snap): click the first pointMessages about blocks, parts lists and standard parts
• Measure angle: click the second point (direction)Messages about blocks, parts lists and standard parts
• Measure distance: click two pointsMessages when modifying
• Measured values copiedMessages about start, files, selection and navigation
• messageMessages for file and tools
• messageMessages for file and tools
• Midpoint between 2 points adoptedMessages about start, files, selection and navigation
• Midpoint between 2 points: cancelledMessages about start, files, selection and navigation
• Midpoint between 2 points: click the first point (with snap)Messages about start, files, selection and navigation
• Midpoint between 2 points: click the second point (with snap)Messages about start, files, selection and navigation
• Minor axis too smallMessages while drawing
• Mirror cancelledMessages when modifying
• Mirror: choose elements — Enter or right-click accepts, ESC cancelsMessages when modifying
• Mirror: click the first point of the mirror axisMessages when modifying
• Model reference scale set to 1:nMessages about paper space
• Model through the window: drag pans the view, mouse wheel changes the scale — double-click outside to finishMessages about paper space
• Model value through viewportMessages about paper space
• Model values through viewportMessages about start, files, selection and navigation
• Model values through viewportMessages about paper space
• mouse = side and distanceMessages when modifying
• Move attachment — snaps to the nearest frame sideMessages for file and tools
• Move the arrow angle...Dimensioning messages
• Move the mouse → radius/sectorMessages when modifying
• Move the print area — click = fixMessages about printing and exporting
• Move the seed point — the boundary is searched again on releaseHatch messages
• Moved by (dx, dy)Messages when modifying

N

• #nMessages about settings, grid and snap
• #nMessages about start, files, selection and navigation
• (no BOM data)Messages about blocks, parts lists and standard parts
• n blocks taken over from the DXF fileMessages for file and tools
• n chain dimensions selectedDimensioning messages
• n copiedMessages when modifying
• n copied (k x) , m hatch(es), k constraintsMessages when modifying
• n dimension(s) adjustedDimensioning messages
• n dimensionsMessages about blocks, parts lists and standard parts
• n dimensions selectedDimensioning messages
• n dimensions/GD&T moved to the lowest Z level (z)Dimensioning messages
• n dimensions/GD&T moved to the lowest Z level (z)Messages on layers, groups, Z levels and constraints
• n element(s) captured — click the base point (with snap)Messages when modifying
• n element(s) hidden (m in total) — ESC or right-click endsMessages on layers, groups, Z levels and constraints
• n element(s) hidden — click more; ESC or right-click endsMessages on layers, groups, Z levels and constraints
• n element(s) hidden — “Show all objects” brings them backMessages on layers, groups, Z levels and constraints
• n element(s) isolated, m hidden — “Show all objects” brings them backMessages on layers, groups, Z levels and constraints
• n element(s) moved to group "Name"Messages on layers, groups, Z levels and constraints
• n elementsMessages when modifying
• n elementsMessages when modifying
• n elements moved to layer "Name"Messages on layers, groups, Z levels and constraints
• n elements selected. OK = export the selection onlyMessages about printing and exporting
• n elements: color changedMessages on layers, groups, Z levels and constraints
• n elements: line style from layerMessages on layers, groups, Z levels and constraints
• n elements: line style NameMessages on layers, groups, Z levels and constraints
• n elements: width wMessages on layers, groups, Z levels and constraints
• n empty group(s) deletedMessages on layers, groups, Z levels and constraints
• n hatchesMessages about blocks, parts lists and standard parts
• n instances replaced → “Name”Messages about blocks, parts lists and standard parts
• n instances selectedMessages about blocks, parts lists and standard parts
• n instances → new variant “Name (2)” — editor opened, the change affects only theseMessages about blocks, parts lists and standard parts
• n layers adopted from the DXFMessages about settings, grid and snap
• n new variants created (one per source block)Messages about blocks, parts lists and standard parts
• n object(s) copied from layer "A" to layer "B"Messages on layers, groups, Z levels and constraints
• n object(s) cut — Ctrl+V pastes at the cursor, Ctrl+Z restoresMessages when modifying
• n object(s) moved from layer "A" to layer "B"Messages on layers, groups, Z levels and constraints
• n object(s) moved to layer "B" — layer "A" deletedMessages on layers, groups, Z levels and constraints
• n object(s) shown againMessages on layers, groups, Z levels and constraints
• n object(s): line type pattern values appliedMessages on layers, groups, Z levels and constraints
• n occurrences in blockMessages about blocks, parts lists and standard parts
• n points placed — click the next element (ESC ends)Messages for file and tools
• n possible findings — a cleanup is offered (any time via Ctrl+F → “Check & clean up drawing”)Messages for file and tools
• n sheet(s) importedMessages about start, files, selection and navigation
• n unused blocks deletedMessages about blocks, parts lists and standard parts
• n weld point(s) releasedMessages when modifying
• n weld(s) created, m point(s) joined — k shiftedMessages when modifying
• Name already takenMessages about blocks, parts lists and standard parts
• Name already takenMessages about settings, grid and snap
• Name is a factory preset — please choose another nameDimensioning messages
• Name now unused (clean up in the block manager)Messages about blocks, parts lists and standard parts
• Name of the new group:Messages on layers, groups, Z levels and constraints
• Name of the new profile:Messages about settings, grid and snap
• Name:Messages on layers, groups, Z levels and constraints
• New drawingMessages about start, files, selection and navigation
• New layer createdMessages on layers, groups, Z levels and constraints
• New name:Messages about settings, grid and snap
• New viewport: click the first corner on the sheet (Escape cancels)Messages about paper space
• Next line — click or enter the endpoint (ESC/right-click = finish)Messages about start, files, selection and navigation
• No block instances selectedMessages about blocks, parts lists and standard parts
• No blocks in this drawingMessages about blocks, parts lists and standard parts
• No blocks matching „…“ found in this drawing.Messages about blocks, parts lists and standard parts
• No blocks placed in this drawingMessages about blocks, parts lists and standard parts
• No centroid availableMessages about start, files, selection and navigation
• No circles or arcs in the drawing — please draw some firstMessages for file and tools
• No circles presentMessages for file and tools
• No closed area at the new seed point — point resetHatch messages
• No closed area foundHatch messages
• No closed area found in the viewportMessages about paper space
• No closed area found in the viewportHatch messages
• No closed area found in the visible view. The whole area to fill must be in view — please zoom out or switch off the option “Visible area only” in the hatch dialog.Hatch messages
• No closed area found. Please click inside a fully enclosed area of the model geometry.Hatch messages
• No closed area found. Please click inside a fully enclosed area.Hatch messages
• No closed area here — nothing createdHatch messages
• No closed area in the visible view — bring the whole area into view or switch the option offHatch messages
• No displacement — click againMessages when modifying
• No displacement — stretch cancelledMessages when modifying
• No element at the click point (line/arc)Messages when modifying
• No element hit — pick up attributes cancelledMessages on layers, groups, Z levels and constraints
• No element hit — picking cancelledMessages on layers, groups, Z levels and constraints
• No element inside the box — ESC or right-click endsMessages on layers, groups, Z levels and constraints
• No element under the cursorMessages when modifying
• No elements found in the SVGMessages for file and tools
• No elements to exportMessages for file and tools
• No elements to exportMessages about printing and exporting
• No empty groupsMessages on layers, groups, Z levels and constraints
• No endpoint nearbyMessages about start, files, selection and navigation
• No entities found in the DXFMessages for file and tools
• No entities in the DXFMessages about start, files, selection and navigation
• No entities in the SVGMessages about start, files, selection and navigation
• No file matches the searchMessages for file and tools
• no findings (check any time via Ctrl+F → “Check & clean up drawing”)Messages for file and tools
• No group matches the searchMessages on layers, groups, Z levels and constraints
• No groupsMessages on layers, groups, Z levels and constraints
• No instances placed (block is only contained in other blocks)Messages about blocks, parts lists and standard parts
• No intersections foundMessages when modifying
• No intersections on the arcMessages when modifying
• No layer matches the searchMessages on layers, groups, Z levels and constraints
• No layer table found in the DXFMessages about settings, grid and snap
• No line at the cursorMessages about start, files, selection and navigation
• No line hit — click a line that defines the directionMessages when modifying
• No matching files (.cad2d, .json, .ldblk) foundMessages for file and tools
• No offsettable element at the click point (line/circle/arc/rectangle/polyline/spline/ellipse)Messages when modifying
• No other block available as targetMessages about blocks, parts lists and standard parts
• No other group available as targetMessages on layers, groups, Z levels and constraints
• No other layer availableMessages on layers, groups, Z levels and constraints
• No points presentMessages for file and tools
• No profile activeMessages about settings, grid and snap
• No profile chosenMessages about printing and exporting
• No profile name givenMessages about printing and exporting
• No rectangle, polyline or spline at the click pointMessages when modifying
• No reference element at the click pointMessages when modifying
• No saved settingsMessages about settings, grid and snap
• No second element at the click pointMessages when modifying
• No segment hitMessages when modifying
• No selection — properties not availableMessages on layers, groups, Z levels and constraints
• No snap point on the preview — move closer to a corner/midpointMessages about blocks, parts lists and standard parts
• No special line type objects in the selectionMessages on layers, groups, Z levels and constraints
• No splittable element under the cursorMessages when modifying
• No standard part matches the searchMessages about blocks, parts lists and standard parts
• No standard parts found (folder normteile/ on the server)Messages about blocks, parts lists and standard parts
• No storable geometry in the selectionMessages about blocks, parts lists and standard parts
• No stretchable points in the window — drag a new window (n not stretchable)Messages when modifying
• No tangent arc possibleMessages when modifying
• No tangent circle foundMessages while drawing
• No tangent circle with ⌀d possibleMessages while drawing
• No tangent touches both on the arcs — pick other circles or arcsMessages while drawing
• No valid geometry for the blockMessages about blocks, parts lists and standard parts
• No valid intersectionsMessages when modifying
• No valid nominal size available to determineDimensioning messages
• No weld within the tolerance (t mm)Messages when modifying
• No weldable endpoints foundMessages when modifying
• No weldable endpoints found — endpoints too far apartMessages when modifying
• No welds on the selectionMessages when modifying
• no.Messages about settings, grid and snap
• None, Enter createsMessages for file and tools
• Not a LiberoDraft drawing (.cad2d)Messages about start, files, selection and navigation
• Not a valid LiberoDraft block file (.ldblk)Messages about blocks, parts lists and standard parts
• not readableMessages for file and tools
• Note: 34.0 x 22.0 mmMessages for file and tools
• Note: 34.0 x 22.0 mm — text is cut off, shown by the triangle at the bottom rightMessages for file and tools
• Note: block is not an item of its own (dissolved assembly?) — balloon shows “?”Messages about blocks, parts lists and standard parts
• Note: drag to resize — the text rewrapsMessages for file and tools
• Note: no datum features yet — create them with the "Datum feature" tool (A, B, C…).Dimensioning messages
• Note: the tooth (… mm) is wider than the period (… mm) — …Messages on layers, groups, Z levels and constraints
• Note: the window is only … mm high at width … mm — …Messages on layers, groups, Z levels and constraints
• Note: with this edge thickness no window remains at width … mm — …Messages on layers, groups, Z levels and constraints
• Nothing copiedMessages when modifying
• Nothing is isolated — all objects are visibleMessages on layers, groups, Z levels and constraints
• Nothing to clean upMessages for file and tools
• Nothing to copyMessages about start, files, selection and navigation
• Nothing to explode — select a rectangle, polyline, spline or ellipseMessages when modifying
• Nothing to fitMessages about paper space
• Nothing to replace (instances already reference the target block)Messages about blocks, parts lists and standard parts
• Notice hidden — constraints remain experimental.Messages on layers, groups, Z levels and constraints
• Number is live from the BOM — for free text, attach the balloon to a non-block elementMessages about blocks, parts lists and standard parts
• Number of pointsMessages for file and tools
• · n sheet(s) importedMessages about paper space
• “Name” also occurs in … — replace there as well?Messages about blocks, parts lists and standard parts
• “Name” received from program — click to placeMessages for file and tools
• “Name”: all instances selected — make the change directly in the definition (double-click)Messages about blocks, parts lists and standard parts
• ⚠ No elementsMessages on layers, groups, Z levels and constraints

O

• Object snap tracking OFFMessages about settings, grid and snap
• Object snap tracking ON — briefly touch a snap point to capture it as a track pointMessages about settings, grid and snap
• Offset created (D=d)Messages when modifying
• Offset distance too small — move the mouse further away or enter a valueMessages when modifying
• Offset not possible (distance too large or too small)Messages when modifying
• Offset result: PolylineMessages when modifying
• Offset result: ∽ SplineMessages when modifying
• Offset result: ≈ EllipseMessages when modifying
• Offset: mouse = side + distanceMessages when modifying
• Offset: mouse = side + distanceMessages when modifying
• One level down (n objects)Messages on layers, groups, Z levels and constraints
• One level up (n objects)Messages on layers, groups, Z levels and constraints
• Online help opened: addressMessages about settings, grid and snap
• Only .cad2d, .dxf, .svg or image filesMessages for file and tools
• Only .cad2d, .dxf, .svg or image filesMessages about start, files, selection and navigation
• Only chain dimensions can be subdividedDimensioning messages
• Only http/https links are supported — link removedMessages for file and tools
• Only without crossMessages for file and tools
• Open standard part "Name" for editing? The current drawing will be replaced (Ctrl+Z restores it).Messages about blocks, parts lists and standard parts
• Opened (drop): file (n elements)Messages about start, files, selection and navigation
• Opened: file (n elements)Messages about start, files, selection and navigation
• Opened: file (n elements, m dimensions)Messages about start, files, selection and navigation
• or “↗ direction” for slanted geometryMessages when modifying
• Orientation, location and run-out tolerances require a datum.Dimensioning messages
• Ortho mode OFFMessages about settings, grid and snap
• Ortho mode ONMessages about settings, grid and snap
• Outside the viewport — point resetMessages about paper space
• Outside the viewport — point resetHatch messages
• Override reset — new objects ByLayer again (from the active layer)Messages on layers, groups, Z levels and constraints
• “Old” → “New”: n instancesMessages about blocks, parts lists and standard parts

P

• Panel order reset to factory defaultMessages about settings, grid and snap
• Panel section order savedMessages about start, files, selection and navigation
• Parts list as block “Name” — click to placeMessages about blocks, parts lists and standard parts
• Parts list exported as CSV (n items)Messages about blocks, parts lists and standard parts
• Perpendicular droppedMessages while drawing
• Perpendicular tangent drawnMessages while drawing
• Pick the width: click beside the arc — or type it and EnterMessages while drawing
• Pick the width: click beside the axis — or type it and EnterMessages while drawing
• Pick up attributes cancelledMessages on layers, groups, Z levels and constraints
• Pick up attributes: click the element whose properties should be adopted (ESC = cancel)Messages on layers, groups, Z levels and constraints
• Pick: click the element whose color, line type and line width should be ticked in the filter (ESC = cancel)Messages on layers, groups, Z levels and constraints
• Picked and added (dimension): color red, 0.35 mmMessages on layers, groups, Z levels and constraints
• Picking cancelledMessages on layers, groups, Z levels and constraints
• Place more points (Enter/double-click=end, C=close)Messages while drawing
• Place the circle (click)...Messages while drawing
• Placement finished — n standard part(s) insertedMessages when modifying
• Placement finished — n standard part(s) insertedMessages about blocks, parts lists and standard parts
• Please choose at least one dimension — ESC cancelsMessages when modifying
• Please choose at least one element — ESC cancelsMessages when modifying
• Please choose two different elementsMessages when modifying
• Please click a DIFFERENT circle or arcMessages while drawing
• Please enter a distance greater than 0Messages about start, files, selection and navigation
• Please enter a tolerance class first (e.g. H7 for a hole, g6 for a shaft)Dimensioning messages
• Please enter a tolerance greater than 0Messages when modifying
• Please keep at least one circle or arc selectedMessages for file and tools
• Please select a block in the list first.Messages about blocks, parts lists and standard parts
• Please select a block instance firstMessages about blocks, parts lists and standard parts
• Please select a dimension type firstDimensioning messages
• Point coincides with a chain point — please click a point in betweenDimensioning messages
• Point coincides with the vertex — click a different pointDimensioning messages
• Point marker radius: r mm (whole drawing)Hatch messages
• Point mode endedMessages about settings, grid and snap
• Point mode: click the reference pointMessages about start, files, selection and navigation
• Point placedMessages while drawing
• point…Messages while drawing
• point…Messages while drawing
• Polar array: at least 2 elementsMessages when modifying
• Polar array: enter count + angle → EnterMessages when modifying
• Polar array: n element copies around (x, y)Messages when modifying
• Polar array: nothing to copyMessages when modifying
• polylineMessages on layers, groups, Z levels and constraints
• Polyline split at (x, y) → 2 piecesMessages when modifying
• Polyline: element dimensioning exists only for line, circle, arc and rectangleDimensioning messages
• Popup blocked — please allow popupsMessages about printing and exporting
• PortraitMessages about printing and exporting
• Position the dimension arc and click…Dimensioning messages
• Position the dimension arc outwards and click…Dimensioning messages
• Position the dimension line (H/V automatic)...Dimensioning messages
• Position the dimension line or click a 2nd element...Dimensioning messages
• Position the dimension line...Dimensioning messages
• Position the print area — click = fix, Ctrl+wheel = scale, wheel = zoomMessages about printing and exporting
• Print area fixed — click the canvas = reposition, 🖨 = printMessages about printing and exporting
• Print calibration resetMessages about printing and exporting
• Print group againMessages about printing and exporting
• Print preview openedMessages about printing and exporting
• Print profile "name" activatedMessages about printing and exporting
• Print profile "name" activated — no profile values for layers: namesMessages about printing and exporting
• Print profile "name" savedMessages about printing and exporting
• Print profile "name" updatedMessages about printing and exporting
• Print profile deletedMessages about printing and exporting
• Printing layout: the sheet is output 1:1Messages about printing and exporting
• Profile downloaded: fileMessages about settings, grid and snap
• Profile file invalid (not JSON)Messages about settings, grid and snap
• Profile loaded: fileMessages about settings, grid and snap
• Profile name (e.g. “Workshop”, “Draft”, “Plotter A0”):Messages about printing and exporting
• Profile not foundMessages about printing and exporting
• Profile saved: fileMessages about settings, grid and snap

Q

No messages found.

R

• R+Enter = fixed radiusMessages when modifying
• R=rotateMessages when modifying
• R=rotateMessages about blocks, parts lists and standard parts
• R=rotateMessages about blocks, parts lists and standard parts
• Radius too smallMessages while drawing
• radius…Messages while drawing
• radius…Messages while drawing
• ReadyMessages about printing and exporting
• ReadyMessages about start, files, selection and navigation
• Ready — choose a tool or use a keyboard shortcutMessages about settings, grid and snap
• Ready — choose a tool or use a keyboard shortcutMessages about start, files, selection and navigation
• Rectangles cannot be split — explode them into lines firstMessages when modifying
• RedoMessages about start, files, selection and navigation
• Redrawn — all running functions cancelledMessages about settings, grid and snap
• Redrawn — all running functions cancelledMessages about start, files, selection and navigation
• Reference point: originMessages about start, files, selection and navigation
• Relative angle — step 1 of 3: click the REFERENCE LINE the angle is measured fromMessages while drawing
• Remark placed — click the next arrow tip (ESC ends)Messages for file and tools
• Remark: click the box positionMessages for file and tools
• Remark: set the arrow tip (ESC ends)Messages for file and tools
• Remarks visibleMessages on layers, groups, Z levels and constraints
• Removed from favouritesMessages about start, files, selection and navigation
• replacedMessages about blocks, parts lists and standard parts
• Reposition dimension point (with snap) — release to placeDimensioning messages
• Reset all settings to factory defaults?Messages about settings, grid and snap
• Restored from blocks: n dimensions, m hatchesDimensioning messages
• Ribbon view — F2 (or Ctrl+Shift+R) switches backMessages about settings, grid and snap
• right-click = scale and optionsMessages about paper space
• right-click = scale and optionsMessages about paper space
• Rotated by a°Messages when modifying
• Rotation point set — set the angle with the mouse or enter it + EnterMessages when modifying

S

• +/−=scaleMessages when modifying
• +/−=scaleMessages about blocks, parts lists and standard parts
• +/−=scaleMessages about blocks, parts lists and standard parts
• Saved as default — these values apply at the next startDimensioning messages
• Saved: name.cad2dMessages about start, files, selection and navigation
• Scale image — drag, Shift = free distortMessages for file and tools
• Scale: click the base point...Messages for file and tools
• Scaled: factor f (n elements)Messages when modifying
• Schraffur selektiert — Umrandung hervorgehoben; Z-Ebene mit PageUp/PageDown verschiebenMessages on layers, groups, Z levels and constraints
• Schraffur: Linien werden berechnet …Hatch messages
• Second axis point…Messages while drawing
• Second semi-axisMessages while drawing
• Second semi-axis too smallMessages while drawing
• Section put back into the panelMessages about start, files, selection and navigation
• Section torn off — ⇥ or dragging it onto the panel brings it backMessages about start, files, selection and navigation
• Seed point moved — hatch boundary searched againHatch messages
• Select elements firstMessages on layers, groups, Z levels and constraints
• Selected viewport: drag = moveMessages about paper space
• Selection filter active: summaryMessages about start, files, selection and navigation
• Selection filter off — all objects selectableMessages about start, files, selection and navigation
• Selection removed from group(s)Messages on layers, groups, Z levels and constraints
• Semi-axis too shortMessages while drawing
• Sent to back (n objects)Messages on layers, groups, Z levels and constraints
• Set the length: click the endpoint (or L + Enter)Messages while drawing
• Settings appliedMessages about settings, grid and snap
• Settings exported as a fileMessages about settings, grid and snap
• Settings imported from "file"Messages about settings, grid and snap
• Settings loadedMessages about settings, grid and snap
• Settings reset to factory defaultsMessages about settings, grid and snap
• since dateMessages about settings, grid and snap
• skipped (cycle): blockMessages about blocks, parts lists and standard parts
• SlotMessages on layers, groups, Z levels and constraints
• Slot drawn — group “name” (width b)Messages while drawing
• Slot: the two centres coincideMessages while drawing
• Snap mode → automatic (geometry tool)Messages about settings, grid and snap
• Snap mode → automatic (geometry tool)Messages about start, files, selection and navigation
• Snap mode: nameMessages about settings, grid and snap
• Snap mode: nameMessages about start, files, selection and navigation
• Snap settings savedMessages about settings, grid and snap
• Spline brokenMessages when modifying
• Spline created: n pointsMessages while drawing
• Spline split at (x, y) → 2 piecesMessages when modifying
• Spline trimmedMessages when modifying
• Spline: n points (Enter/double-click=end, C=close)Messages while drawing
• Split circles first (split tool), then form the corner with the arcMessages when modifying
• Split failedMessages when modifying
• Split: type not supportedMessages when modifying
• Sprache: DeutschMessages about settings, grid and snap
• Standard part "Kopie": a click places it (multiple times possible)Messages when modifying
• Standard part "Name" downloaded — place it on the server in normteile/<category>/Messages about blocks, parts lists and standard parts
• Standard part "Name" opened for editing — modify, select and use "Save as standard part" againMessages about blocks, parts lists and standard parts
• Standard part "Name": a click places it (multiple times possible)Messages about blocks, parts lists and standard parts
• Standard part list reloadedMessages about blocks, parts lists and standard parts
• Standard part name:Messages about blocks, parts lists and standard parts
• Standard parts: 3 name(s) were not stored in UTF-8 and were re-encoded for display — please repeat the upload in UTF-8Messages about blocks, parts lists and standard parts
• Start point: lengthMessages about start, files, selection and navigation
• Start point: XMessages about start, files, selection and navigation
• Step 2 of 3: click the START POINT of the new line (object snap is active)Messages while drawing
• Step 3 of 3: click the END POINT — or type the angle ∠ (to the reference line) and the length L and draw with Enter. TAB after the angle locks it.Messages while drawing
• Stretch window: click the 2nd corner — points inside the window get stretchedMessages when modifying
• Stretched: n element(s)Messages when modifying
• SVG error: reasonMessages about start, files, selection and navigation
• SVG exported: n elements → fileMessages about printing and exporting
• SVG exported: sheet name — n elements → fileMessages about printing and exporting
• SVG import error: reasonMessages for file and tools
• SVG imported (drop): n entitiesMessages about start, files, selection and navigation
• SVG imported: n elements from nameMessages for file and tools
• SVG opened: n entities from fileMessages about start, files, selection and navigation
• ⇄ switches to polarMessages about start, files, selection and navigation
• ⇄ switches to X/YMessages about start, files, selection and navigation

T

• Tab + Space = result typeMessages when modifying
• Tangent circle created (⌀d)Messages while drawing
• Tangent from point drawnMessages while drawing
• Tangent point lies on the target line — no tangent possibleMessages while drawing
• Tangent to both drawnMessages while drawing
• Target block not foundMessages about blocks, parts lists and standard parts
• Target layer "Name" is locked. Move the contents there anyway?Messages on layers, groups, Z levels and constraints
• Temporary track point set (n active) — hovering again removes itMessages about settings, grid and snap
• Text changedMessages for file and tools
• Texts visibleMessages on layers, groups, Z levels and constraints
• The 3 points are collinearMessages while drawing
• The block editor is already activeMessages about blocks, parts lists and standard parts
• The block is contained in Name. Remove it there first.Messages about blocks, parts lists and standard parts
• The block is still placed n× in the drawing. Delete or explode all instances first.Messages about blocks, parts lists and standard parts
• The chamfer cannot be calculated (lines parallel or invalid values)Messages when modifying
• The circles are concentric — no common tangentMessages while drawing
• The drawing contains n hidden block(s). Should they be INCLUDED in the parts list? OK = includeMessages about blocks, parts lists and standard parts
• The elements do not intersect (not even extended)Messages when modifying
• The factor must be > 0Messages when modifying
• The file contains no importable geometryMessages for file and tools
• The file contains no importable geometryMessages about start, files, selection and navigation
• The file is not a valid DXF profileMessages about settings, grid and snap
• The first element must not be a closed circle (split it first)Messages when modifying
• The group is emptyMessages on layers, groups, Z levels and constraints
• The info box will be shown again at program startMessages about settings, grid and snap
• The info box will be shown again at program startMessages about start, files, selection and navigation
• The lines are parallel — no bisector possibleMessages while drawing
• The point lies inside the circle — no tangent possibleMessages while drawing
• The point lies on the circle — tangent not determinable thereMessages while drawing
• The point lies on the line — no distance possibleDimensioning messages
• The point lies on the line — no perpendicular possibleMessages while drawing
• The selection belongs to no groupMessages on layers, groups, Z levels and constraints
• The split position lies on a corner — not splitMessages when modifying
• The split position lies on an arc end — not splitMessages when modifying
• The split position lies on an endpoint — not splitMessages when modifying
• The standard part contains no valid geometryMessages about blocks, parts lists and standard parts
• The standard part could not be loaded: …Messages about blocks, parts lists and standard parts
• The tangent touches outside the arc — pick another arc or a circleMessages while drawing
• The viewport of this through-hatch no longer existsMessages about paper space
• The viewport of this through-hatch no longer existsHatch messages
• This finding draws nothing in the drawing — there is no place to showMessages for file and tools
• This folder is emptyMessages about blocks, parts lists and standard parts
• This structured BOM has no sub-levels and therefore matches the quantity BOM …Messages about blocks, parts lists and standard parts
• Through-hatch copied — same settings at the new spotHatch messages
• Through-hatch selected — not the viewport. Click the frame to select the viewportMessages about paper space
• Through-hatch selected — not the viewport. Click the frame to select the viewportHatch messages
• Tolerance frame placed — click the next arrow target (ESC ends)Dimensioning messages
• Tolerance frame placed — click the next position (ESC ends)Dimensioning messages
• Too close to the first point — click the second point a bit further awayMessages about blocks, parts lists and standard parts
• total launches: nMessages about settings, grid and snap
• Track point captured (n active) — hovering again removes itMessages about settings, grid and snap
• Track point removed (n active)Messages about settings, grid and snap
• Trim one element: click the reference element (stays unchanged)Messages when modifying
• Trim two elements: click the 2nd element (on the side to keep)Messages when modifying
• Trim: type not supportedMessages when modifying
• Trimming left no remainderMessages when modifying
• ⚠ Tangent needs a circle/arc + line, or two circlesMessages on layers, groups, Z levels and constraints
• ⚠ The 1st element must be a pointMessages on layers, groups, Z levels and constraints
• ⚠ The elements do not intersect even when extended (parallel lines?)Messages on layers, groups, Z levels and constraints
• ⚠ The line is already horizontal — it cannot also be verticalMessages on layers, groups, Z levels and constraints
• ⚠ The line is already vertical — it cannot also be horizontalMessages on layers, groups, Z levels and constraints
• ⚠ The same constraint already exists on this pairMessages on layers, groups, Z levels and constraints
• ⚠ This constraint already exists on the elementMessages on layers, groups, Z levels and constraints

U

• UndoMessages about start, files, selection and navigation
• Users worldwide: nMessages about settings, grid and snap

V

• v1.0.5Messages about settings, grid and snap
• v_1.0.5_Messages about start, files, selection and navigation
• View fitted automatically on loadMessages about start, files, selection and navigation
• View fitted — scale 1:nMessages about paper space
• Viewport copiedMessages about paper space
• Viewport created — scale 1:nMessages about paper space
• Viewport deletedMessages about paper space
• Viewport deleted — Undo restores itMessages about paper space
• Viewport is locked — right-click opens its settingsMessages about paper space
• Viewport lockedMessages about paper space
• Viewport scale 1:n: set the model reference scale for line type patterns to 1:n as well?Messages on layers, groups, Z levels and constraints
• Viewport scale 1:n: set the model reference scale for line type patterns to 1:n as well? This makes the MODEL show the same patterns as this viewport. The viewport image itself stays unchanged — through the viewport paper sizes apply (true to print).Messages about paper space
• Viewport selected — drag a corner grip to resizeMessages about paper space
• Viewport selected — drag to move itMessages about paper space
• Viewport selected — drag to move, the corner grips resizeMessages about paper space
• Viewport too small — cancelledMessages about paper space
• Viewport unlockedMessages about paper space
• Viewport: click = select (then movable)Messages about paper space

W

• Warning: datum A is still used by tolerance frames.Dimensioning messages
• Weld markers hiddenMessages when modifying
• Weld markers shownMessages when modifying
• Whole element broken away (deleted)Messages when modifying
• Width too smallMessages while drawing
• Width/height must not be 0 — check the valuesMessages for file and tools
• Width: click the edge (snap to existing geometry) — or type it and EnterMessages while drawing
• Window zoom endedMessages about start, files, selection and navigation
• Window zoom: frame an area (press a corner and drag, or two clicks) — stays active, ESC or right mouse button ends itMessages about start, files, selection and navigation
• Window zoom: frame the next area — ESC or right mouse button ends itMessages about start, files, selection and navigation

X

• (x, y)Messages while drawing
• X/U axis: drag the mouse or enter a parallel distance + EnterMessages about settings, grid and snap

Y

• Y (absolute coordinate)Messages about start, files, selection and navigation
• Y/V axis: drag the mouse or enter a parallel distance + EnterMessages about settings, grid and snap

Z

No messages found.

+

No messages found.