Skip to content
LiberoDraft PDM PDM Help
Deutsch
Home › A Getting started › Installation and first start

Installation and first start

LiberoDraft PDM is a Windows program (Windows 10/11). It is installed with a setup or started as a single program file LiberoDraft_PDM.exe — both ways lead to the same program.

Installation with the setup

  1. Start LiberoDraft_PDM_Setup.exe. The setup installs for the logged-in user only and needs no administrator rights.
  2. Read the terms of use and tick the box — without consent the setup cannot continue.
  3. Choose the components: program, user guide (PDF) and a desktop shortcut.
  4. Afterwards the program is located in %LOCALAPPDATA%\Programs\CADTEC\LiberoDraft PDM and in the Start menu folder "CADTEC".
Note

When a newly downloaded file is started for the first time, Windows SmartScreen may show a warning because the program is not signed. "More info" › "Run anyway" starts it.

Start without setup

The program file LiberoDraft_PDM.exe can also be started from any folder without installation. Only the location matters: the PDM stores its configuration and data file next to the program file. A folder synchronized by Dropbox or OneDrive makes two PCs see the same settings and the same custom fields — see Two PCs, one configuration.

First start

At the first start the terms of use appear. They must be accepted explicitly with the check box, otherwise the program does not start. The consent is recorded in the configuration; if the text changes later, you are asked again.

The terms of use at the first start — the check box enables "Accept"
The terms of use at the first start — the check box enables "Accept"

Then the Settings window opens because no folder has been entered yet:

  1. On the "Folders and types" tab choose the root folder of your drawings with "Add…" — subfolders are read automatically.
  2. Check the file types (drawings, standard parts and block files are preset).
  3. Close with "OK". The first scan starts immediately.

The first scan

The first pass reads every file once completely, draws its preview image and stores both in the cache. The status bar shows the progress ("Updating 12/240: K-001_Base_plate.cad2d"). Large collections take correspondingly long — as a guide, a floor plan with 5000 elements needs about half a second. The grid fills while the scan is still running; you can search and browse right away.

All later refreshes are fast because only new, changed or removed files are processed. With directory monitoring switched on this even happens by itself, without F5.

Tip

With a network drive or a large Dropbox folder it pays to let the first scan run and adjust the settings (language, thumbnail size, custom fields) afterwards.

Language

The user interface is German or English. The default is "Automatic": if the Windows display language is German, the PDM starts in German, otherwise in English. To change it: "Settings…" › tab "Storage and display" › "Sprache / Language". The change takes effect immediately; the window is rebuilt.